PRP
PRP Powder encapsulates hydrocarbons, forming a physical matrix land and water, allowing remediation to take place.
Oil Buster
Oil Buster is a combination of PRP with different grades of ground corncob or other sorbent ingredients for use on hard surfaces.
Bio-Sok
Bio-Sok captures and biodegrades oil and fuel which leaks into a boat bilge, avoiding accidentally pumping of oil, fuel overboard and storm water.
Bio Boom
Vapor-X will encapsulate dangerous gases and suppress VOC’s thus reducing exposure. Vapor-X is an excellent hydrocarbon emulsifier it can be used effectively as a cleaner.
Vapor-x
Vapor-X will encapsulate dangerous gases and suppress VOC’s thus reducing exposure. Vapor-X is an excellent hydrocarbon emulsifier it can be used effectively as a cleaner.
WC 9840
Liquid nonionic, non-emulsifier surfactant developed for use in acidizing, cementing, and stimulation applications. The product effectively disperses and water wets oil coated, acid insoluble solids.
Well-Boom
Well Boom will facilitate testing in groundwater monitoring wells, absorbing contaminants in the well, and prevent hydrocarbons from leaching.
Scale Inhibitor 500
Neutralized Phosphonate Blend
Scale Inhibitor 300
Amine methylene phosphonic acid designed for scale prevention and treatment of calcium, magnesium, barium, strontium or iron scales.
Scale Inhibitor200
Hydroxyamino phosphate ester with low molecular weight polyacrylates designed as a scale preventive product for squeeze or continuous treatment of calcium carbonate, calcium, barium, and strontium sulfate across a broad pH range.
Pop 200
Reduction of torque and drag, as well as better control of bit weight
Pop 100
Eliminates torque and drag, prevents differential sticking, protects from corrosion
PPD 126 WS
Lower molecular weight synergistic blend of poly esters and surfactants designed for lower temperature melting points and wax appearance temperatures.
PPD 125 WS
A medium molecular weight copolymer ester based pour point depressant. Designed for pour point ranges between 20 and 35°C
Polyalkylated Phenol
Pour point depressant and wax dispersant. Modified to have better cold temperature performance and effective on both microcrystalline was and intermediate wax appearance temperatures.
Very high molecular weight inhibitor for waxes with a melting point range above 60°C
PPD 112 CM
Polyalkylated phenol – pour point depressant and wax dispersant. Modified to have better cold temperature performance and effective on both microcrystalline was and intermediate wax appearance temperatures.
PPD 110 CM
High molecular weight crystal modifier and dispersant combination. Excellent for high melting point waxes and Wax appearance temperature between 30 – 50 °C
SD 110
A blend of solvents and surfactants designed to disperse hydrocarbon sludge containing a mix of waxes and asphaltenes
Paraffin Inhibitor
Oil soluble blend of wax crystal modifiers, dispersants and polar solvents designed for application in down hole remedial treatments.
PD 17 RTU
Paraffin Dispersant/Solvent; Great for well clean out’s; excellent broad spectrum wax dissolver; aids in the removal of waxy deposits; excellent well stimulation chemistry
PD 16
Exhibiting excellent paraffin and sludge penetration while neutralizing paraffin bonds to disperse sludge and prevent plugging of tubular goods and surface flow lines.
Mea Triazine
MEA-TRIAZINE is a water-soluble formulation of Triazine designed to remove hydrogen sulfide (H2S) from production systems.
DFA 100
Cement fluid loss additive
Primary Emulsifier
Primary emulsifier for formulating invert drilling fluids, provides fluid loss, used with AR-Combo Emulsifier
Combo Emulsifier
Primary and Secondary emulsifier, fluid loss in oil-based drilling fluids
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Bonding Catalyst
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
GS 22 Passivator
This solution will quickly remove Oxides/ Scales with minimal loss of base metal. This acid deoxidizer has exceptional detergency and corrosion inhibitor and passivation.
WT-4450
Broad spectrum biocide used to control sulfate reducing bacteria
Tetris 75
Antibacterial 75% concentration. Excellent to dissolve Iron Sulfide
Tetris 50
Antibacterial 50% concentration. Excellent to dissolve Iron Sulfide
Glut 25 & Glut 50
Glut Water Treatment Agent
Bio-Daz
Antibacterial that could kill for up to 2 -3 weeks. In some case bacteria is eliminated for up to 6 months.
X-400
4.0lb Xanthan gum slurry
DFA 100
Drilling Mud Additive in fresh water and brines, tolerant in high temperature, Xanthan replacement, viscosification
Sweep-A
Freshwater viscosifier for coiled tubing gel sweeps
Surfactant MW
Surfactant (Microemulsion)
NI-NE 100
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
COAG 100
Polyamines. High charge, relatively low molecular weights compared to dewatering polymers. They are replacements for Alum & FeCl3 in that they have high charge but much high molecular weights and work well as coagulants prior to solids dewatering.
PA 100C
Cationic polyacrylamide in water – in – oil emulsion / flocculant
FR 7290
Synthetic cationic organic polymer of highmolecular weight and high cationic charge supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package.
DFA 100
A high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of cationic charge. FL-120C FG is supplied in a free-flowing fine prill and microbead form that allows for rapid hydration & suspension in carrier fluids. The FL-120C FG Series provides exceptional performance in freshwater and low brine fluid conditions.
FL 100 C Pf
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of cationic charge. The product is supplied in a free-flowing fine prill and microbead form that allows for rapid hydration & suspension in carrier fluids. The FL-110C PF Series provides exceptional performance in freshwater and low brine fluid conditions. Chemistry variations available designed for multiple applications.
Bonding Catalyst
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
COAG 200
Poly DADMAC’s high charge, relatively low molecular weights compared to dewatering polymers. They are replacements for Alum & FeCl3 in that they have high charge but much high molecular weights and work well as coagulants prior to solids dewatering.
Oxygen Scavenger 200
Water soluble Ammonium Bisulfite Solution with Nickel Catalyst concentrate designed for use in oil field applications.
Oxygen Scavenger 100
Minimizes corrosion rates, 48 to 52% active catalyzed ammonium bisulfite solution that functions as a liquid oxygen scavenger for use in all types of water systems
Lube 150
Water-based drilling mud lubricant, tolerant in high temperature, viscosification
KCL-Sub
Liquid Potassium Chloride Substitute
Iron Control
Prevents Iron precipitation during flow back
GS-100 Guar Slurry
4.0lb Liquid Guar Slurry (40/45) and 4.0lb Liquid Guar Slurry (35/40)
FR-230AW
Winterized, fresh water to medium brine
FR-200
Anionic Friction Reducer (High brine/ Divalent)
FR 499 A
A medium molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a very high degree of anionic charge. FR-499 A is supplied in a free-flowing dry granular powder form. The FR-499 A Series provides exceptional performance in freshwater and low brine fluid conditions.
FR 340 VHA
High molecular weight, synthetic organic polyacrylamide based flocculant, which exhibits a high degree of anionic charge. FR-340 VHA is supplied in a free-flowing dry granular powder form.
FR 340 UHA
A ultra high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a high degree of anionic charge. FR-340 UHA is supplied in a free-flowing dry granular powder form. The FR-340 UHA Series provides exceptional performance in freshwater and low brine fluid conditions.
FR 340 A G
A high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a high degree of anionic charge. FR-340 A is supplied in a free-flowing dry granular powder form. The FR-340 A Series provides exceptional performance in freshwater and low brine
FR 330 UHA
Powder, anionic solids control product, suitable in WBM and OBM
FR 330 A
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a medium degree of anionic charge. FR-330 A is supplied in a free-flowing dry granular powder form. The FR-330 A Series provides exceptional performance in freshwater & low brine fluid conditions.
FR 315 A FG
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of anionic charge. FR 315 A FG is supplied in a free-flowing dry granular powder form. Fresh and high brine; dry anionic, fine grind
FR 310 LA
Powder, anionic solids control product, suitable in WBM
FR 300 LA FG
High molecular weight, granular, dry synthetic organic polyacrylamide based flocculent, which exhibits a very low degree of anionic charge. Fresh and high brine; dry anionic, fine grind
FR 252 AG
High purity hydrolyzed anionic emulsion AMPS co-polymer and Xanthan blend dispersed in a water and limited oil soluble carrier. AMPS-high brine, high temperature, high pressure; anionic. Chemistry variations available designed for multiple applications.
FR 250 A
Anionic FR, Sulfonated, medium to high brine
FR 248 A
Anionic Friction Reducer
FR 247A
Highly effective in multivalet and monovalet saturated complexes brines (example: 40-110,000 mg/l TDS). Fast activation ensures maximum pressure loss occurs within a 30 second timeframe.
FR 245A
Highly effective in multivalet and monovalet saturated complexes brines (example: 150-250,000 mg/l TDS). Fast activation ensures maximum pressure loss occurs within a 30 second timeframe.
FR 244A
Anionic Friction Reducer
FR 243A
Highly effective in very high calcium saturated brines (example: 24% – 32% CaCl2 brines). An excellent performer in API type brines; fast activation ensures maximum pressure loss occurs within a 30 second timeframe. Chemistry variations available designed for multiple applications.
FR 240A
Economical FR, fresh water to light brine
FR 235C
A synthetic organic polymer of high molecular weight and high cationic supplied as a rapidly hydrating emulsion. High brine; PHPA for coil tubing; cationic
FR 232A
Anionic Friction Reducer
FR 230C
Synthetic organic polymer of different molecular weight and medium/low cationic degree supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package; cationic
FR 230A
Fresh water to medium brine
FR 225CG
Synthetic organic polymer and Xanthan blend of high molecular weight and high cationic supplied as a rapidly hydrating emulsion. High brine; PHPA for coil tubing; cationic.
FR 220C
A synthetic organic polymer of different molecular weight and low cationic degree supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package; cationic
FR 220A
Anionic water-soluble polymer in emulsion; Exceptional performance in freshwater low brine and extremely high brine fluid conditions.
FR 211A
Anionic (<5% charge) polyacrylamide in water-in-oil emulsion. Stimulation/cement additive for drilling fluids; highly effective in fresh water/low brine applications.
FR 210N
Non-ionic FR
FR 150 A
Anionic FR, medium to high brine, builds viscosity. Viscosifier in brine systems for coiled tubing gel sweeps, HE-150 replacement
FR 140 C
Powder, cationic solids control product, durable performance, suitable in WBM.
FR 140 AP
Anionic Polyacrylamide in Water-in-Oil Emulsion/Flocculant
CL 100
Instant Borate Cross linker
Stream Clean 600
Full concentrate only; This product leaves tanks clean & smelling fresh with a fresh, citrus odor.
Stream Clean 500
Full Concentrate only; CONCENTRATED non hazardous environmentally safe solvent with emulsifying agent designed for dissolving Asphaltene and Paraffin deposits.
Stream Clean 400 DG
Suggested dilution: 5 to 1; A neutral liquid, solvent free, general purpose cleaner.
Stream Clean 300
Suggested dilution: 5 to 1; environmentally safe, tough-acting cleaning solvent, designed to take the place of highly volatile hydrocarbon solvents.
Stream Clean 200
Suggested dilution: 5 to 1; concentrated, highly alkaline emulsifier and cleaner, which is biodegradable, water soluble, non-flammable and non-toxic.
Stream Clean 111
Suggested dilution: 5 to 1; contains a unique deodorizing agent to control chemical odors during cleaning operations
Stream Clean 100
Suggested dilution: 5 to 1; industrial strength water soluble, nonflammable butyl solvent detergent degreaser
Clay Stabilizer
Lessens the swelling of the clay
PH Adjust 300
A high alkaline pH modifier agent for high alkaline fracturing fluid. It is used both in borate and zirconium cross-linked fluids where a pH of 10 or higher is needed for gel stability.
pH Adjust 300 contains potassium hydroxide and potassium carbonate in an aqueous solutions.
PH Adjust 100 SH
This is a high alkaline pH modifier and is primarily used to adjust the pH. Sodium Hydroxide based formula.
PH Adjust 100 PH
This is a high alkaline pH modifier and is primarily used to adjust the pH. Potassium Hydroxide based formula.
PC Non Caustic Buffer
Potassium Carbonate
Buffer 200
Low pH Buffer
Buffer 100
High pH Buffer
GB 400
Powdered Breaker (APS; Live/Non-Encapsulated)
GB 265
Liquid Enzyme Breaker
GB 100 E LT
Low Temp Encapsulated Breaker (APS)
GB 100 E HT
High temp encapsulated breaker (APS)
AD 100
Unique blend of surfactants and solvents designed to aid in the dispersion of asphaltenes and asphaltic materials into crude oil or aliphatic solvents. AD 100 acts to improve the stability of these mixtures and as well as reduce their pour points.
AD 200
Asphaltene Dispersant, heavy oil viscosity modifier aids in deposit removal
DF 200
General purpose defoamer for muds in freshwater or brine systems, oil and NPE-free
Activator
Highly effective intermediate for crude oil dehydration, water drop speed, desalting, and other applications for water-in-oil emulsion resolution.
DF 100
Water-based silicon defoamer, no mineral oil or FBS, performs well in a variety of applications
Q-60 Corrosion Inhibitor
Surfactant is a versatile and effective corrosion inhibitor for use in acid cleaning application.
PRP
PRP Powder encapsulates hydrocarbons, forming a physical matrix land and water, allowing remediation to take place.
Oil Buster
Oil Buster is a combination of PRP with different grades of ground corncob or other sorbent ingredients for use on hard surfaces.
Bio-Sok
Bio-Sok captures and biodegrades oil and fuel which leaks into a boat bilge, avoiding accidentally pumping of oil, fuel overboard and storm water.
Bio Boom
Vapor-X will encapsulate dangerous gases and suppress VOC’s thus reducing exposure. Vapor-X is an excellent hydrocarbon emulsifier it can be used effectively as a cleaner.
Vapor-x
Vapor-X will encapsulate dangerous gases and suppress VOC’s thus reducing exposure. Vapor-X is an excellent hydrocarbon emulsifier it can be used effectively as a cleaner.
WC 9840
Liquid nonionic, non-emulsifier surfactant developed for use in acidizing, cementing, and stimulation applications. The product effectively disperses and water wets oil coated, acid insoluble solids.
Well-Boom
Well Boom will facilitate testing in groundwater monitoring wells, absorbing contaminants in the well, and prevent hydrocarbons from leaching.
Scale Inhibitor 500
Neutralized Phosphonate Blend
Scale Inhibitor 300
Amine methylene phosphonic acid designed for scale prevention and treatment of calcium, magnesium, barium, strontium or iron scales.
Scale Inhibitor200
Hydroxyamino phosphate ester with low molecular weight polyacrylates designed as a scale preventive product for squeeze or continuous treatment of calcium carbonate, calcium, barium, and strontium sulfate across a broad pH range.
Pop 200
Reduction of torque and drag, as well as better control of bit weight
Pop 100
Eliminates torque and drag, prevents differential sticking, protects from corrosion
PPD 126 WS
Lower molecular weight synergistic blend of poly esters and surfactants designed for lower temperature melting points and wax appearance temperatures.
PPD 125 WS
A medium molecular weight copolymer ester based pour point depressant. Designed for pour point ranges between 20 and 35°C
Polyalkylated Phenol
Pour point depressant and wax dispersant. Modified to have better cold temperature performance and effective on both microcrystalline was and intermediate wax appearance temperatures.
Very high molecular weight inhibitor for waxes with a melting point range above 60°C
PPD 112 CM
Polyalkylated phenol – pour point depressant and wax dispersant. Modified to have better cold temperature performance and effective on both microcrystalline was and intermediate wax appearance temperatures.
PPD 110 CM
High molecular weight crystal modifier and dispersant combination. Excellent for high melting point waxes and Wax appearance temperature between 30 – 50 °C
SD 110
A blend of solvents and surfactants designed to disperse hydrocarbon sludge containing a mix of waxes and asphaltenes
Paraffin Inhibitor
Oil soluble blend of wax crystal modifiers, dispersants and polar solvents designed for application in down hole remedial treatments.
PD 17 RTU
Paraffin Dispersant/Solvent; Great for well clean out’s; excellent broad spectrum wax dissolver; aids in the removal of waxy deposits; excellent well stimulation chemistry
PD 16
Exhibiting excellent paraffin and sludge penetration while neutralizing paraffin bonds to disperse sludge and prevent plugging of tubular goods and surface flow lines.
Mea Triazine
MEA-TRIAZINE is a water-soluble formulation of Triazine designed to remove hydrogen sulfide (H2S) from production systems.
DFA 100
Cement fluid loss additive
Primary Emulsifier
Primary emulsifier for formulating invert drilling fluids, provides fluid loss, used with AR-Combo Emulsifier
Combo Emulsifier
Primary and Secondary emulsifier, fluid loss in oil-based drilling fluids
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Bonding Catalyst
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
GS 22 Passivator
This solution will quickly remove Oxides/ Scales with minimal loss of base metal. This acid deoxidizer has exceptional detergency and corrosion inhibitor and passivation.
WT-4450
Broad spectrum biocide used to control sulfate reducing bacteria
Tetris 75
Antibacterial 75% concentration. Excellent to dissolve Iron Sulfide
Tetris 50
Antibacterial 50% concentration. Excellent to dissolve Iron Sulfide
Glut 25 & Glut 50
Glut Water Treatment Agent
Bio-Daz
Antibacterial that could kill for up to 2 -3 weeks. In some case bacteria is eliminated for up to 6 months.
X-400
4.0lb Xanthan gum slurry
DFA 100
Drilling Mud Additive in fresh water and brines, tolerant in high temperature, Xanthan replacement, viscosification
Sweep-A
Freshwater viscosifier for coiled tubing gel sweeps
Surfactant MW
Surfactant (Microemulsion)
NI-NE 100
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
COAG 100
Polyamines. High charge, relatively low molecular weights compared to dewatering polymers. They are replacements for Alum & FeCl3 in that they have high charge but much high molecular weights and work well as coagulants prior to solids dewatering.
PA 100C
Cationic polyacrylamide in water – in – oil emulsion / flocculant
FR 7290
Synthetic cationic organic polymer of highmolecular weight and high cationic charge supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package.
DFA 100
A high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of cationic charge. FL-120C FG is supplied in a free-flowing fine prill and microbead form that allows for rapid hydration & suspension in carrier fluids. The FL-120C FG Series provides exceptional performance in freshwater and low brine fluid conditions.
FL 100 C Pf
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of cationic charge. The product is supplied in a free-flowing fine prill and microbead form that allows for rapid hydration & suspension in carrier fluids. The FL-110C PF Series provides exceptional performance in freshwater and low brine fluid conditions. Chemistry variations available designed for multiple applications.
Bonding Catalyst
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
COAG 200
Poly DADMAC’s high charge, relatively low molecular weights compared to dewatering polymers. They are replacements for Alum & FeCl3 in that they have high charge but much high molecular weights and work well as coagulants prior to solids dewatering.
Oxygen Scavenger 200
Water soluble Ammonium Bisulfite Solution with Nickel Catalyst concentrate designed for use in oil field applications.
Oxygen Scavenger 100
Minimizes corrosion rates, 48 to 52% active catalyzed ammonium bisulfite solution that functions as a liquid oxygen scavenger for use in all types of water systems
Lube 150
Water-based drilling mud lubricant, tolerant in high temperature, viscosification
KCL-Sub
Liquid Potassium Chloride Substitute
Iron Control
Prevents Iron precipitation during flow back
GS-100 Guar Slurry
4.0lb Liquid Guar Slurry (40/45) and 4.0lb Liquid Guar Slurry (35/40)
FR-230AW
Winterized, fresh water to medium brine
FR-200
Anionic Friction Reducer (High brine/ Divalent)
FR 499 A
A medium molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a very high degree of anionic charge. FR-499 A is supplied in a free-flowing dry granular powder form. The FR-499 A Series provides exceptional performance in freshwater and low brine fluid conditions.
FR 340 VHA
High molecular weight, synthetic organic polyacrylamide based flocculant, which exhibits a high degree of anionic charge. FR-340 VHA is supplied in a free-flowing dry granular powder form.
FR 340 UHA
A ultra high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a high degree of anionic charge. FR-340 UHA is supplied in a free-flowing dry granular powder form. The FR-340 UHA Series provides exceptional performance in freshwater and low brine fluid conditions.
FR 340 A G
A high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a high degree of anionic charge. FR-340 A is supplied in a free-flowing dry granular powder form. The FR-340 A Series provides exceptional performance in freshwater and low brine
FR 330 UHA
Powder, anionic solids control product, suitable in WBM and OBM
FR 330 A
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a medium degree of anionic charge. FR-330 A is supplied in a free-flowing dry granular powder form. The FR-330 A Series provides exceptional performance in freshwater & low brine fluid conditions.
FR 315 A FG
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of anionic charge. FR 315 A FG is supplied in a free-flowing dry granular powder form. Fresh and high brine; dry anionic, fine grind
FR 310 LA
Powder, anionic solids control product, suitable in WBM
FR 300 LA FG
High molecular weight, granular, dry synthetic organic polyacrylamide based flocculent, which exhibits a very low degree of anionic charge. Fresh and high brine; dry anionic, fine grind
FR 252 AG
High purity hydrolyzed anionic emulsion AMPS co-polymer and Xanthan blend dispersed in a water and limited oil soluble carrier. AMPS-high brine, high temperature, high pressure; anionic. Chemistry variations available designed for multiple applications.
FR 250 A
Anionic FR, Sulfonated, medium to high brine
FR 248 A
Anionic Friction Reducer
FR 247A
Highly effective in multivalet and monovalet saturated complexes brines (example: 40-110,000 mg/l TDS). Fast activation ensures maximum pressure loss occurs within a 30 second timeframe.
FR 245A
Highly effective in multivalet and monovalet saturated complexes brines (example: 150-250,000 mg/l TDS). Fast activation ensures maximum pressure loss occurs within a 30 second timeframe.
FR 244A
Anionic Friction Reducer
FR 243A
Highly effective in very high calcium saturated brines (example: 24% – 32% CaCl2 brines). An excellent performer in API type brines; fast activation ensures maximum pressure loss occurs within a 30 second timeframe. Chemistry variations available designed for multiple applications.
FR 240A
Economical FR, fresh water to light brine
FR 235C
A synthetic organic polymer of high molecular weight and high cationic supplied as a rapidly hydrating emulsion. High brine; PHPA for coil tubing; cationic
FR 232A
Anionic Friction Reducer
FR 230C
Synthetic organic polymer of different molecular weight and medium/low cationic degree supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package; cationic
FR 230A
Fresh water to medium brine
FR 225CG
Synthetic organic polymer and Xanthan blend of high molecular weight and high cationic supplied as a rapidly hydrating emulsion. High brine; PHPA for coil tubing; cationic.
FR 220C
A synthetic organic polymer of different molecular weight and low cationic degree supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package; cationic
FR 220A
Anionic water-soluble polymer in emulsion; Exceptional performance in freshwater low brine and extremely high brine fluid conditions.
FR 211A
Anionic (<5% charge) polyacrylamide in water-in-oil emulsion. Stimulation/cement additive for drilling fluids; highly effective in fresh water/low brine applications.
FR 210N
Non-ionic FR
FR 150 A
Anionic FR, medium to high brine, builds viscosity. Viscosifier in brine systems for coiled tubing gel sweeps, HE-150 replacement
FR 140 C
Powder, cationic solids control product, durable performance, suitable in WBM.
FR 140 AP
Anionic Polyacrylamide in Water-in-Oil Emulsion/Flocculant
CL 100
Instant Borate Cross linker
Stream Clean 600
Full concentrate only; This product leaves tanks clean & smelling fresh with a fresh, citrus odor.
Stream Clean 500
Full Concentrate only; CONCENTRATED non hazardous environmentally safe solvent with emulsifying agent designed for dissolving Asphaltene and Paraffin deposits.
Stream Clean 400 DG
Suggested dilution: 5 to 1; A neutral liquid, solvent free, general purpose cleaner.
Stream Clean 300
Suggested dilution: 5 to 1; environmentally safe, tough-acting cleaning solvent, designed to take the place of highly volatile hydrocarbon solvents.
Stream Clean 200
Suggested dilution: 5 to 1; concentrated, highly alkaline emulsifier and cleaner, which is biodegradable, water soluble, non-flammable and non-toxic.
Stream Clean 111
Suggested dilution: 5 to 1; contains a unique deodorizing agent to control chemical odors during cleaning operations
Stream Clean 100
Suggested dilution: 5 to 1; industrial strength water soluble, nonflammable butyl solvent detergent degreaser
Clay Stabilizer
Lessens the swelling of the clay
PH Adjust 300
A high alkaline pH modifier agent for high alkaline fracturing fluid. It is used both in borate and zirconium cross-linked fluids where a pH of 10 or higher is needed for gel stability.
pH Adjust 300 contains potassium hydroxide and potassium carbonate in an aqueous solutions.
PH Adjust 100 SH
This is a high alkaline pH modifier and is primarily used to adjust the pH. Sodium Hydroxide based formula.
PH Adjust 100 PH
This is a high alkaline pH modifier and is primarily used to adjust the pH. Potassium Hydroxide based formula.
PC Non Caustic Buffer
Potassium Carbonate
Buffer 200
Low pH Buffer
Buffer 100
High pH Buffer
GB 400
Powdered Breaker (APS; Live/Non-Encapsulated)
GB 265
Liquid Enzyme Breaker
GB 100 E LT
Low Temp Encapsulated Breaker (APS)
GB 100 E HT
High temp encapsulated breaker (APS)
AD 100
Unique blend of surfactants and solvents designed to aid in the dispersion of asphaltenes and asphaltic materials into crude oil or aliphatic solvents. AD 100 acts to improve the stability of these mixtures and as well as reduce their pour points.
AD 200
Asphaltene Dispersant, heavy oil viscosity modifier aids in deposit removal
DF 200
General purpose defoamer for muds in freshwater or brine systems, oil and NPE-free
Activator
Highly effective intermediate for crude oil dehydration, water drop speed, desalting, and other applications for water-in-oil emulsion resolution.
DF 100
Water-based silicon defoamer, no mineral oil or FBS, performs well in a variety of applications
Q-60 Corrosion Inhibitor
Surfactant is a versatile and effective corrosion inhibitor for use in acid cleaning application.
PRP
PRP Powder encapsulates hydrocarbons, forming a physical matrix land and water, allowing remediation to take place.
Oil Buster
Oil Buster is a combination of PRP with different grades of ground corncob or other sorbent ingredients for use on hard surfaces.
Bio-Sok
Bio-Sok captures and biodegrades oil and fuel which leaks into a boat bilge, avoiding accidentally pumping of oil, fuel overboard and storm water.
Bio Boom
Vapor-X will encapsulate dangerous gases and suppress VOC’s thus reducing exposure. Vapor-X is an excellent hydrocarbon emulsifier it can be used effectively as a cleaner.
Vapor-x
Vapor-X will encapsulate dangerous gases and suppress VOC’s thus reducing exposure. Vapor-X is an excellent hydrocarbon emulsifier it can be used effectively as a cleaner.
WC 9840
Liquid nonionic, non-emulsifier surfactant developed for use in acidizing, cementing, and stimulation applications. The product effectively disperses and water wets oil coated, acid insoluble solids.
Well-Boom
Well Boom will facilitate testing in groundwater monitoring wells, absorbing contaminants in the well, and prevent hydrocarbons from leaching.
Scale Inhibitor 500
Neutralized Phosphonate Blend
Scale Inhibitor 300
Amine methylene phosphonic acid designed for scale prevention and treatment of calcium, magnesium, barium, strontium or iron scales.
Scale Inhibitor200
Hydroxyamino phosphate ester with low molecular weight polyacrylates designed as a scale preventive product for squeeze or continuous treatment of calcium carbonate, calcium, barium, and strontium sulfate across a broad pH range.
Pop 200
Reduction of torque and drag, as well as better control of bit weight
Pop 100
Eliminates torque and drag, prevents differential sticking, protects from corrosion
PPD 126 WS
Lower molecular weight synergistic blend of poly esters and surfactants designed for lower temperature melting points and wax appearance temperatures.
PPD 125 WS
A medium molecular weight copolymer ester based pour point depressant. Designed for pour point ranges between 20 and 35°C
Polyalkylated Phenol
Pour point depressant and wax dispersant. Modified to have better cold temperature performance and effective on both microcrystalline was and intermediate wax appearance temperatures.
Very high molecular weight inhibitor for waxes with a melting point range above 60°C
PPD 112 CM
Polyalkylated phenol – pour point depressant and wax dispersant. Modified to have better cold temperature performance and effective on both microcrystalline was and intermediate wax appearance temperatures.
PPD 110 CM
High molecular weight crystal modifier and dispersant combination. Excellent for high melting point waxes and Wax appearance temperature between 30 – 50 °C
SD 110
A blend of solvents and surfactants designed to disperse hydrocarbon sludge containing a mix of waxes and asphaltenes
Paraffin Inhibitor
Oil soluble blend of wax crystal modifiers, dispersants and polar solvents designed for application in down hole remedial treatments.
PD 17 RTU
Paraffin Dispersant/Solvent; Great for well clean out’s; excellent broad spectrum wax dissolver; aids in the removal of waxy deposits; excellent well stimulation chemistry
PD 16
Exhibiting excellent paraffin and sludge penetration while neutralizing paraffin bonds to disperse sludge and prevent plugging of tubular goods and surface flow lines.
Mea Triazine
MEA-TRIAZINE is a water-soluble formulation of Triazine designed to remove hydrogen sulfide (H2S) from production systems.
DFA 100
Cement fluid loss additive
Primary Emulsifier
Primary emulsifier for formulating invert drilling fluids, provides fluid loss, used with AR-Combo Emulsifier
Combo Emulsifier
Primary and Secondary emulsifier, fluid loss in oil-based drilling fluids
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Bonding Catalyst
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
GS 22 Passivator
This solution will quickly remove Oxides/ Scales with minimal loss of base metal. This acid deoxidizer has exceptional detergency and corrosion inhibitor and passivation.
WT-4450
Broad spectrum biocide used to control sulfate reducing bacteria
Tetris 75
Antibacterial 75% concentration. Excellent to dissolve Iron Sulfide
Tetris 50
Antibacterial 50% concentration. Excellent to dissolve Iron Sulfide
Glut 25 & Glut 50
Glut Water Treatment Agent
Bio-Daz
Antibacterial that could kill for up to 2 -3 weeks. In some case bacteria is eliminated for up to 6 months.
X-400
4.0lb Xanthan gum slurry
DFA 100
Drilling Mud Additive in fresh water and brines, tolerant in high temperature, Xanthan replacement, viscosification
Sweep-A
Freshwater viscosifier for coiled tubing gel sweeps
Surfactant MW
Surfactant (Microemulsion)
NI-NE 100
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
COAG 100
Polyamines. High charge, relatively low molecular weights compared to dewatering polymers. They are replacements for Alum & FeCl3 in that they have high charge but much high molecular weights and work well as coagulants prior to solids dewatering.
PA 100C
Cationic polyacrylamide in water – in – oil emulsion / flocculant
FR 7290
Synthetic cationic organic polymer of highmolecular weight and high cationic charge supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package.
DFA 100
A high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of cationic charge. FL-120C FG is supplied in a free-flowing fine prill and microbead form that allows for rapid hydration & suspension in carrier fluids. The FL-120C FG Series provides exceptional performance in freshwater and low brine fluid conditions.
FL 100 C Pf
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of cationic charge. The product is supplied in a free-flowing fine prill and microbead form that allows for rapid hydration & suspension in carrier fluids. The FL-110C PF Series provides exceptional performance in freshwater and low brine fluid conditions. Chemistry variations available designed for multiple applications.
Bonding Catalyst
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
COAG 200
Poly DADMAC’s high charge, relatively low molecular weights compared to dewatering polymers. They are replacements for Alum & FeCl3 in that they have high charge but much high molecular weights and work well as coagulants prior to solids dewatering.
Oxygen Scavenger 200
Water soluble Ammonium Bisulfite Solution with Nickel Catalyst concentrate designed for use in oil field applications.
Oxygen Scavenger 100
Minimizes corrosion rates, 48 to 52% active catalyzed ammonium bisulfite solution that functions as a liquid oxygen scavenger for use in all types of water systems
Lube 150
Water-based drilling mud lubricant, tolerant in high temperature, viscosification
KCL-Sub
Liquid Potassium Chloride Substitute
Iron Control
Prevents Iron precipitation during flow back
GS-100 Guar Slurry
4.0lb Liquid Guar Slurry (40/45) and 4.0lb Liquid Guar Slurry (35/40)
FR-230AW
Winterized, fresh water to medium brine
FR-200
Anionic Friction Reducer (High brine/ Divalent)
FR 499 A
A medium molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a very high degree of anionic charge. FR-499 A is supplied in a free-flowing dry granular powder form. The FR-499 A Series provides exceptional performance in freshwater and low brine fluid conditions.
FR 340 VHA
High molecular weight, synthetic organic polyacrylamide based flocculant, which exhibits a high degree of anionic charge. FR-340 VHA is supplied in a free-flowing dry granular powder form.
FR 340 UHA
A ultra high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a high degree of anionic charge. FR-340 UHA is supplied in a free-flowing dry granular powder form. The FR-340 UHA Series provides exceptional performance in freshwater and low brine fluid conditions.
FR 340 A G
A high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a high degree of anionic charge. FR-340 A is supplied in a free-flowing dry granular powder form. The FR-340 A Series provides exceptional performance in freshwater and low brine
FR 330 UHA
Powder, anionic solids control product, suitable in WBM and OBM
FR 330 A
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a medium degree of anionic charge. FR-330 A is supplied in a free-flowing dry granular powder form. The FR-330 A Series provides exceptional performance in freshwater & low brine fluid conditions.
FR 315 A FG
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of anionic charge. FR 315 A FG is supplied in a free-flowing dry granular powder form. Fresh and high brine; dry anionic, fine grind
FR 310 LA
Powder, anionic solids control product, suitable in WBM
FR 300 LA FG
High molecular weight, granular, dry synthetic organic polyacrylamide based flocculent, which exhibits a very low degree of anionic charge. Fresh and high brine; dry anionic, fine grind
FR 252 AG
High purity hydrolyzed anionic emulsion AMPS co-polymer and Xanthan blend dispersed in a water and limited oil soluble carrier. AMPS-high brine, high temperature, high pressure; anionic. Chemistry variations available designed for multiple applications.
FR 250 A
Anionic FR, Sulfonated, medium to high brine
FR 248 A
Anionic Friction Reducer
FR 247A
Highly effective in multivalet and monovalet saturated complexes brines (example: 40-110,000 mg/l TDS). Fast activation ensures maximum pressure loss occurs within a 30 second timeframe.
FR 245A
Highly effective in multivalet and monovalet saturated complexes brines (example: 150-250,000 mg/l TDS). Fast activation ensures maximum pressure loss occurs within a 30 second timeframe.
FR 244A
Anionic Friction Reducer
FR 243A
Highly effective in very high calcium saturated brines (example: 24% – 32% CaCl2 brines). An excellent performer in API type brines; fast activation ensures maximum pressure loss occurs within a 30 second timeframe. Chemistry variations available designed for multiple applications.
FR 240A
Economical FR, fresh water to light brine
FR 235C
A synthetic organic polymer of high molecular weight and high cationic supplied as a rapidly hydrating emulsion. High brine; PHPA for coil tubing; cationic
FR 232A
Anionic Friction Reducer
FR 230C
Synthetic organic polymer of different molecular weight and medium/low cationic degree supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package; cationic
FR 230A
Fresh water to medium brine
FR 225CG
Synthetic organic polymer and Xanthan blend of high molecular weight and high cationic supplied as a rapidly hydrating emulsion. High brine; PHPA for coil tubing; cationic.
FR 220C
A synthetic organic polymer of different molecular weight and low cationic degree supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package; cationic
FR 220A
Anionic water-soluble polymer in emulsion; Exceptional performance in freshwater low brine and extremely high brine fluid conditions.
FR 211A
Anionic (<5% charge) polyacrylamide in water-in-oil emulsion. Stimulation/cement additive for drilling fluids; highly effective in fresh water/low brine applications.
FR 210N
Non-ionic FR
FR 150 A
Anionic FR, medium to high brine, builds viscosity. Viscosifier in brine systems for coiled tubing gel sweeps, HE-150 replacement
FR 140 C
Powder, cationic solids control product, durable performance, suitable in WBM.
FR 140 AP
Anionic Polyacrylamide in Water-in-Oil Emulsion/Flocculant
CL 100
Instant Borate Cross linker
Stream Clean 600
Full concentrate only; This product leaves tanks clean & smelling fresh with a fresh, citrus odor.
Stream Clean 500
Full Concentrate only; CONCENTRATED non hazardous environmentally safe solvent with emulsifying agent designed for dissolving Asphaltene and Paraffin deposits.
Stream Clean 400 DG
Suggested dilution: 5 to 1; A neutral liquid, solvent free, general purpose cleaner.
Stream Clean 300
Suggested dilution: 5 to 1; environmentally safe, tough-acting cleaning solvent, designed to take the place of highly volatile hydrocarbon solvents.
Stream Clean 200
Suggested dilution: 5 to 1; concentrated, highly alkaline emulsifier and cleaner, which is biodegradable, water soluble, non-flammable and non-toxic.
Stream Clean 111
Suggested dilution: 5 to 1; contains a unique deodorizing agent to control chemical odors during cleaning operations
Stream Clean 100
Suggested dilution: 5 to 1; industrial strength water soluble, nonflammable butyl solvent detergent degreaser
Clay Stabilizer
Lessens the swelling of the clay
PH Adjust 300
A high alkaline pH modifier agent for high alkaline fracturing fluid. It is used both in borate and zirconium cross-linked fluids where a pH of 10 or higher is needed for gel stability.
pH Adjust 300 contains potassium hydroxide and potassium carbonate in an aqueous solutions.
PH Adjust 100 SH
This is a high alkaline pH modifier and is primarily used to adjust the pH. Sodium Hydroxide based formula.
PH Adjust 100 PH
This is a high alkaline pH modifier and is primarily used to adjust the pH. Potassium Hydroxide based formula.
PC Non Caustic Buffer
Potassium Carbonate
Buffer 200
Low pH Buffer
Buffer 100
High pH Buffer
GB 400
Powdered Breaker (APS; Live/Non-Encapsulated)
GB 265
Liquid Enzyme Breaker
GB 100 E LT
Low Temp Encapsulated Breaker (APS)
GB 100 E HT
High temp encapsulated breaker (APS)
AD 100
Unique blend of surfactants and solvents designed to aid in the dispersion of asphaltenes and asphaltic materials into crude oil or aliphatic solvents. AD 100 acts to improve the stability of these mixtures and as well as reduce their pour points.
AD 200
Asphaltene Dispersant, heavy oil viscosity modifier aids in deposit removal
DF 200
General purpose defoamer for muds in freshwater or brine systems, oil and NPE-free
Activator
Highly effective intermediate for crude oil dehydration, water drop speed, desalting, and other applications for water-in-oil emulsion resolution.
DF 100
Water-based silicon defoamer, no mineral oil or FBS, performs well in a variety of applications
Q-60 Corrosion Inhibitor
Surfactant is a versatile and effective corrosion inhibitor for use in acid cleaning application.
PRP
PRP Powder encapsulates hydrocarbons, forming a physical matrix land and water, allowing remediation to take place.
Oil Buster
Oil Buster is a combination of PRP with different grades of ground corncob or other sorbent ingredients for use on hard surfaces.
Bio-Sok
Bio-Sok captures and biodegrades oil and fuel which leaks into a boat bilge, avoiding accidentally pumping of oil, fuel overboard and storm water.
Bio Boom
Vapor-X will encapsulate dangerous gases and suppress VOC’s thus reducing exposure. Vapor-X is an excellent hydrocarbon emulsifier it can be used effectively as a cleaner.
Vapor-x
Vapor-X will encapsulate dangerous gases and suppress VOC’s thus reducing exposure. Vapor-X is an excellent hydrocarbon emulsifier it can be used effectively as a cleaner.
WC 9840
Liquid nonionic, non-emulsifier surfactant developed for use in acidizing, cementing, and stimulation applications. The product effectively disperses and water wets oil coated, acid insoluble solids.
Well-Boom
Well Boom will facilitate testing in groundwater monitoring wells, absorbing contaminants in the well, and prevent hydrocarbons from leaching.
Scale Inhibitor 500
Neutralized Phosphonate Blend
Scale Inhibitor 300
Amine methylene phosphonic acid designed for scale prevention and treatment of calcium, magnesium, barium, strontium or iron scales.
Scale Inhibitor200
Hydroxyamino phosphate ester with low molecular weight polyacrylates designed as a scale preventive product for squeeze or continuous treatment of calcium carbonate, calcium, barium, and strontium sulfate across a broad pH range.
Pop 200
Reduction of torque and drag, as well as better control of bit weight
Pop 100
Eliminates torque and drag, prevents differential sticking, protects from corrosion
PPD 126 WS
Lower molecular weight synergistic blend of poly esters and surfactants designed for lower temperature melting points and wax appearance temperatures.
PPD 125 WS
A medium molecular weight copolymer ester based pour point depressant. Designed for pour point ranges between 20 and 35°C
Polyalkylated Phenol
Pour point depressant and wax dispersant. Modified to have better cold temperature performance and effective on both microcrystalline was and intermediate wax appearance temperatures.
Very high molecular weight inhibitor for waxes with a melting point range above 60°C
PPD 112 CM
Polyalkylated phenol – pour point depressant and wax dispersant. Modified to have better cold temperature performance and effective on both microcrystalline was and intermediate wax appearance temperatures.
PPD 110 CM
High molecular weight crystal modifier and dispersant combination. Excellent for high melting point waxes and Wax appearance temperature between 30 – 50 °C
SD 110
A blend of solvents and surfactants designed to disperse hydrocarbon sludge containing a mix of waxes and asphaltenes
Paraffin Inhibitor
Oil soluble blend of wax crystal modifiers, dispersants and polar solvents designed for application in down hole remedial treatments.
PD 17 RTU
Paraffin Dispersant/Solvent; Great for well clean out’s; excellent broad spectrum wax dissolver; aids in the removal of waxy deposits; excellent well stimulation chemistry
PD 16
Exhibiting excellent paraffin and sludge penetration while neutralizing paraffin bonds to disperse sludge and prevent plugging of tubular goods and surface flow lines.
Mea Triazine
MEA-TRIAZINE is a water-soluble formulation of Triazine designed to remove hydrogen sulfide (H2S) from production systems.
DFA 100
Cement fluid loss additive
Primary Emulsifier
Primary emulsifier for formulating invert drilling fluids, provides fluid loss, used with AR-Combo Emulsifier
Combo Emulsifier
Primary and Secondary emulsifier, fluid loss in oil-based drilling fluids
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Bonding Catalyst
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
GS 22 Passivator
This solution will quickly remove Oxides/ Scales with minimal loss of base metal. This acid deoxidizer has exceptional detergency and corrosion inhibitor and passivation.
WT-4450
Broad spectrum biocide used to control sulfate reducing bacteria
Tetris 75
Antibacterial 75% concentration. Excellent to dissolve Iron Sulfide
Tetris 50
Antibacterial 50% concentration. Excellent to dissolve Iron Sulfide
Glut 25 & Glut 50
Glut Water Treatment Agent
Bio-Daz
Antibacterial that could kill for up to 2 -3 weeks. In some case bacteria is eliminated for up to 6 months.
X-400
4.0lb Xanthan gum slurry
DFA 100
Drilling Mud Additive in fresh water and brines, tolerant in high temperature, Xanthan replacement, viscosification
Sweep-A
Freshwater viscosifier for coiled tubing gel sweeps
Surfactant MW
Surfactant (Microemulsion)
NI-NE 100
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
COAG 100
Polyamines. High charge, relatively low molecular weights compared to dewatering polymers. They are replacements for Alum & FeCl3 in that they have high charge but much high molecular weights and work well as coagulants prior to solids dewatering.
PA 100C
Cationic polyacrylamide in water – in – oil emulsion / flocculant
FR 7290
Synthetic cationic organic polymer of highmolecular weight and high cationic charge supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package.
DFA 100
A high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of cationic charge. FL-120C FG is supplied in a free-flowing fine prill and microbead form that allows for rapid hydration & suspension in carrier fluids. The FL-120C FG Series provides exceptional performance in freshwater and low brine fluid conditions.
FL 100 C Pf
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of cationic charge. The product is supplied in a free-flowing fine prill and microbead form that allows for rapid hydration & suspension in carrier fluids. The FL-110C PF Series provides exceptional performance in freshwater and low brine fluid conditions. Chemistry variations available designed for multiple applications.
Bonding Catalyst
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
COAG 200
Poly DADMAC’s high charge, relatively low molecular weights compared to dewatering polymers. They are replacements for Alum & FeCl3 in that they have high charge but much high molecular weights and work well as coagulants prior to solids dewatering.
Oxygen Scavenger 200
Water soluble Ammonium Bisulfite Solution with Nickel Catalyst concentrate designed for use in oil field applications.
Oxygen Scavenger 100
Minimizes corrosion rates, 48 to 52% active catalyzed ammonium bisulfite solution that functions as a liquid oxygen scavenger for use in all types of water systems
Lube 150
Water-based drilling mud lubricant, tolerant in high temperature, viscosification
KCL-Sub
Liquid Potassium Chloride Substitute
Iron Control
Prevents Iron precipitation during flow back
GS-100 Guar Slurry
4.0lb Liquid Guar Slurry (40/45) and 4.0lb Liquid Guar Slurry (35/40)
FR-230AW
Winterized, fresh water to medium brine
FR-200
Anionic Friction Reducer (High brine/ Divalent)
FR 499 A
A medium molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a very high degree of anionic charge. FR-499 A is supplied in a free-flowing dry granular powder form. The FR-499 A Series provides exceptional performance in freshwater and low brine fluid conditions.
FR 340 VHA
High molecular weight, synthetic organic polyacrylamide based flocculant, which exhibits a high degree of anionic charge. FR-340 VHA is supplied in a free-flowing dry granular powder form.
FR 340 UHA
A ultra high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a high degree of anionic charge. FR-340 UHA is supplied in a free-flowing dry granular powder form. The FR-340 UHA Series provides exceptional performance in freshwater and low brine fluid conditions.
FR 340 A G
A high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a high degree of anionic charge. FR-340 A is supplied in a free-flowing dry granular powder form. The FR-340 A Series provides exceptional performance in freshwater and low brine
FR 330 UHA
Powder, anionic solids control product, suitable in WBM and OBM
FR 330 A
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a medium degree of anionic charge. FR-330 A is supplied in a free-flowing dry granular powder form. The FR-330 A Series provides exceptional performance in freshwater & low brine fluid conditions.
FR 315 A FG
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of anionic charge. FR 315 A FG is supplied in a free-flowing dry granular powder form. Fresh and high brine; dry anionic, fine grind
FR 310 LA
Powder, anionic solids control product, suitable in WBM
FR 300 LA FG
High molecular weight, granular, dry synthetic organic polyacrylamide based flocculent, which exhibits a very low degree of anionic charge. Fresh and high brine; dry anionic, fine grind
FR 252 AG
High purity hydrolyzed anionic emulsion AMPS co-polymer and Xanthan blend dispersed in a water and limited oil soluble carrier. AMPS-high brine, high temperature, high pressure; anionic. Chemistry variations available designed for multiple applications.
FR 250 A
Anionic FR, Sulfonated, medium to high brine
FR 248 A
Anionic Friction Reducer
FR 247A
Highly effective in multivalet and monovalet saturated complexes brines (example: 40-110,000 mg/l TDS). Fast activation ensures maximum pressure loss occurs within a 30 second timeframe.
FR 245A
Highly effective in multivalet and monovalet saturated complexes brines (example: 150-250,000 mg/l TDS). Fast activation ensures maximum pressure loss occurs within a 30 second timeframe.
FR 244A
Anionic Friction Reducer
FR 243A
Highly effective in very high calcium saturated brines (example: 24% – 32% CaCl2 brines). An excellent performer in API type brines; fast activation ensures maximum pressure loss occurs within a 30 second timeframe. Chemistry variations available designed for multiple applications.
FR 240A
Economical FR, fresh water to light brine
FR 235C
A synthetic organic polymer of high molecular weight and high cationic supplied as a rapidly hydrating emulsion. High brine; PHPA for coil tubing; cationic
FR 232A
Anionic Friction Reducer
FR 230C
Synthetic organic polymer of different molecular weight and medium/low cationic degree supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package; cationic
FR 230A
Fresh water to medium brine
FR 225CG
Synthetic organic polymer and Xanthan blend of high molecular weight and high cationic supplied as a rapidly hydrating emulsion. High brine; PHPA for coil tubing; cationic.
FR 220C
A synthetic organic polymer of different molecular weight and low cationic degree supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package; cationic
FR 220A
Anionic water-soluble polymer in emulsion; Exceptional performance in freshwater low brine and extremely high brine fluid conditions.
FR 211A
Anionic (<5% charge) polyacrylamide in water-in-oil emulsion. Stimulation/cement additive for drilling fluids; highly effective in fresh water/low brine applications.
FR 210N
Non-ionic FR
FR 150 A
Anionic FR, medium to high brine, builds viscosity. Viscosifier in brine systems for coiled tubing gel sweeps, HE-150 replacement
FR 140 C
Powder, cationic solids control product, durable performance, suitable in WBM.
FR 140 AP
Anionic Polyacrylamide in Water-in-Oil Emulsion/Flocculant
CL 100
Instant Borate Cross linker
Stream Clean 600
Full concentrate only; This product leaves tanks clean & smelling fresh with a fresh, citrus odor.
Stream Clean 500
Full Concentrate only; CONCENTRATED non hazardous environmentally safe solvent with emulsifying agent designed for dissolving Asphaltene and Paraffin deposits.
Stream Clean 400 DG
Suggested dilution: 5 to 1; A neutral liquid, solvent free, general purpose cleaner.
Stream Clean 300
Suggested dilution: 5 to 1; environmentally safe, tough-acting cleaning solvent, designed to take the place of highly volatile hydrocarbon solvents.
Stream Clean 200
Suggested dilution: 5 to 1; concentrated, highly alkaline emulsifier and cleaner, which is biodegradable, water soluble, non-flammable and non-toxic.
Stream Clean 111
Suggested dilution: 5 to 1; contains a unique deodorizing agent to control chemical odors during cleaning operations
Stream Clean 100
Suggested dilution: 5 to 1; industrial strength water soluble, nonflammable butyl solvent detergent degreaser
Clay Stabilizer
Lessens the swelling of the clay
PH Adjust 300
A high alkaline pH modifier agent for high alkaline fracturing fluid. It is used both in borate and zirconium cross-linked fluids where a pH of 10 or higher is needed for gel stability.
pH Adjust 300 contains potassium hydroxide and potassium carbonate in an aqueous solutions.
PH Adjust 100 SH
This is a high alkaline pH modifier and is primarily used to adjust the pH. Sodium Hydroxide based formula.
PH Adjust 100 PH
This is a high alkaline pH modifier and is primarily used to adjust the pH. Potassium Hydroxide based formula.
PC Non Caustic Buffer
Potassium Carbonate
Buffer 200
Low pH Buffer
Buffer 100
High pH Buffer
GB 400
Powdered Breaker (APS; Live/Non-Encapsulated)
GB 265
Liquid Enzyme Breaker
GB 100 E LT
Low Temp Encapsulated Breaker (APS)
GB 100 E HT
High temp encapsulated breaker (APS)
AD 100
Unique blend of surfactants and solvents designed to aid in the dispersion of asphaltenes and asphaltic materials into crude oil or aliphatic solvents. AD 100 acts to improve the stability of these mixtures and as well as reduce their pour points.
AD 200
Asphaltene Dispersant, heavy oil viscosity modifier aids in deposit removal
DF 200
General purpose defoamer for muds in freshwater or brine systems, oil and NPE-free
Activator
Highly effective intermediate for crude oil dehydration, water drop speed, desalting, and other applications for water-in-oil emulsion resolution.
DF 100
Water-based silicon defoamer, no mineral oil or FBS, performs well in a variety of applications
Q-60 Corrosion Inhibitor
Surfactant is a versatile and effective corrosion inhibitor for use in acid cleaning application.
PRP
PRP Powder encapsulates hydrocarbons, forming a physical matrix land and water, allowing remediation to take place.
Oil Buster
Oil Buster is a combination of PRP with different grades of ground corncob or other sorbent ingredients for use on hard surfaces.
Bio-Sok
Bio-Sok captures and biodegrades oil and fuel which leaks into a boat bilge, avoiding accidentally pumping of oil, fuel overboard and storm water.
Bio Boom
Vapor-X will encapsulate dangerous gases and suppress VOC’s thus reducing exposure. Vapor-X is an excellent hydrocarbon emulsifier it can be used effectively as a cleaner.
Vapor-x
Vapor-X will encapsulate dangerous gases and suppress VOC’s thus reducing exposure. Vapor-X is an excellent hydrocarbon emulsifier it can be used effectively as a cleaner.
WC 9840
Liquid nonionic, non-emulsifier surfactant developed for use in acidizing, cementing, and stimulation applications. The product effectively disperses and water wets oil coated, acid insoluble solids.
Well-Boom
Well Boom will facilitate testing in groundwater monitoring wells, absorbing contaminants in the well, and prevent hydrocarbons from leaching.
Scale Inhibitor 500
Neutralized Phosphonate Blend
Scale Inhibitor 300
Amine methylene phosphonic acid designed for scale prevention and treatment of calcium, magnesium, barium, strontium or iron scales.
Scale Inhibitor200
Hydroxyamino phosphate ester with low molecular weight polyacrylates designed as a scale preventive product for squeeze or continuous treatment of calcium carbonate, calcium, barium, and strontium sulfate across a broad pH range.
Pop 200
Reduction of torque and drag, as well as better control of bit weight
Pop 100
Eliminates torque and drag, prevents differential sticking, protects from corrosion
PPD 126 WS
Lower molecular weight synergistic blend of poly esters and surfactants designed for lower temperature melting points and wax appearance temperatures.
PPD 125 WS
A medium molecular weight copolymer ester based pour point depressant. Designed for pour point ranges between 20 and 35°C
Polyalkylated Phenol
Pour point depressant and wax dispersant. Modified to have better cold temperature performance and effective on both microcrystalline was and intermediate wax appearance temperatures.
Very high molecular weight inhibitor for waxes with a melting point range above 60°C
PPD 112 CM
Polyalkylated phenol – pour point depressant and wax dispersant. Modified to have better cold temperature performance and effective on both microcrystalline was and intermediate wax appearance temperatures.
PPD 110 CM
High molecular weight crystal modifier and dispersant combination. Excellent for high melting point waxes and Wax appearance temperature between 30 – 50 °C
SD 110
A blend of solvents and surfactants designed to disperse hydrocarbon sludge containing a mix of waxes and asphaltenes
Paraffin Inhibitor
Oil soluble blend of wax crystal modifiers, dispersants and polar solvents designed for application in down hole remedial treatments.
PD 17 RTU
Paraffin Dispersant/Solvent; Great for well clean out’s; excellent broad spectrum wax dissolver; aids in the removal of waxy deposits; excellent well stimulation chemistry
PD 16
Exhibiting excellent paraffin and sludge penetration while neutralizing paraffin bonds to disperse sludge and prevent plugging of tubular goods and surface flow lines.
Mea Triazine
MEA-TRIAZINE is a water-soluble formulation of Triazine designed to remove hydrogen sulfide (H2S) from production systems.
DFA 100
Cement fluid loss additive
Primary Emulsifier
Primary emulsifier for formulating invert drilling fluids, provides fluid loss, used with AR-Combo Emulsifier
Combo Emulsifier
Primary and Secondary emulsifier, fluid loss in oil-based drilling fluids
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Bonding Catalyst
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
GS 22 Passivator
This solution will quickly remove Oxides/ Scales with minimal loss of base metal. This acid deoxidizer has exceptional detergency and corrosion inhibitor and passivation.
WT-4450
Broad spectrum biocide used to control sulfate reducing bacteria
Tetris 75
Antibacterial 75% concentration. Excellent to dissolve Iron Sulfide
Tetris 50
Antibacterial 50% concentration. Excellent to dissolve Iron Sulfide
Glut 25 & Glut 50
Glut Water Treatment Agent
Bio-Daz
Antibacterial that could kill for up to 2 -3 weeks. In some case bacteria is eliminated for up to 6 months.
X-400
4.0lb Xanthan gum slurry
DFA 100
Drilling Mud Additive in fresh water and brines, tolerant in high temperature, Xanthan replacement, viscosification
Sweep-A
Freshwater viscosifier for coiled tubing gel sweeps
Surfactant MW
Surfactant (Microemulsion)
NI-NE 100
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
COAG 100
Polyamines. High charge, relatively low molecular weights compared to dewatering polymers. They are replacements for Alum & FeCl3 in that they have high charge but much high molecular weights and work well as coagulants prior to solids dewatering.
PA 100C
Cationic polyacrylamide in water – in – oil emulsion / flocculant
FR 7290
Synthetic cationic organic polymer of highmolecular weight and high cationic charge supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package.
DFA 100
A high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of cationic charge. FL-120C FG is supplied in a free-flowing fine prill and microbead form that allows for rapid hydration & suspension in carrier fluids. The FL-120C FG Series provides exceptional performance in freshwater and low brine fluid conditions.
FL 100 C Pf
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of cationic charge. The product is supplied in a free-flowing fine prill and microbead form that allows for rapid hydration & suspension in carrier fluids. The FL-110C PF Series provides exceptional performance in freshwater and low brine fluid conditions. Chemistry variations available designed for multiple applications.
Bonding Catalyst
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
COAG 200
Poly DADMAC’s high charge, relatively low molecular weights compared to dewatering polymers. They are replacements for Alum & FeCl3 in that they have high charge but much high molecular weights and work well as coagulants prior to solids dewatering.
Oxygen Scavenger 200
Water soluble Ammonium Bisulfite Solution with Nickel Catalyst concentrate designed for use in oil field applications.
Oxygen Scavenger 100
Minimizes corrosion rates, 48 to 52% active catalyzed ammonium bisulfite solution that functions as a liquid oxygen scavenger for use in all types of water systems
Lube 150
Water-based drilling mud lubricant, tolerant in high temperature, viscosification
KCL-Sub
Liquid Potassium Chloride Substitute
Iron Control
Prevents Iron precipitation during flow back
GS-100 Guar Slurry
4.0lb Liquid Guar Slurry (40/45) and 4.0lb Liquid Guar Slurry (35/40)
FR-230AW
Winterized, fresh water to medium brine
FR-200
Anionic Friction Reducer (High brine/ Divalent)
FR 499 A
A medium molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a very high degree of anionic charge. FR-499 A is supplied in a free-flowing dry granular powder form. The FR-499 A Series provides exceptional performance in freshwater and low brine fluid conditions.
FR 340 VHA
High molecular weight, synthetic organic polyacrylamide based flocculant, which exhibits a high degree of anionic charge. FR-340 VHA is supplied in a free-flowing dry granular powder form.
FR 340 UHA
A ultra high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a high degree of anionic charge. FR-340 UHA is supplied in a free-flowing dry granular powder form. The FR-340 UHA Series provides exceptional performance in freshwater and low brine fluid conditions.
FR 340 A G
A high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a high degree of anionic charge. FR-340 A is supplied in a free-flowing dry granular powder form. The FR-340 A Series provides exceptional performance in freshwater and low brine
FR 330 UHA
Powder, anionic solids control product, suitable in WBM and OBM
FR 330 A
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a medium degree of anionic charge. FR-330 A is supplied in a free-flowing dry granular powder form. The FR-330 A Series provides exceptional performance in freshwater & low brine fluid conditions.
FR 315 A FG
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of anionic charge. FR 315 A FG is supplied in a free-flowing dry granular powder form. Fresh and high brine; dry anionic, fine grind
FR 310 LA
Powder, anionic solids control product, suitable in WBM
FR 300 LA FG
High molecular weight, granular, dry synthetic organic polyacrylamide based flocculent, which exhibits a very low degree of anionic charge. Fresh and high brine; dry anionic, fine grind
FR 252 AG
High purity hydrolyzed anionic emulsion AMPS co-polymer and Xanthan blend dispersed in a water and limited oil soluble carrier. AMPS-high brine, high temperature, high pressure; anionic. Chemistry variations available designed for multiple applications.
FR 250 A
Anionic FR, Sulfonated, medium to high brine
FR 248 A
Anionic Friction Reducer
FR 247A
Highly effective in multivalet and monovalet saturated complexes brines (example: 40-110,000 mg/l TDS). Fast activation ensures maximum pressure loss occurs within a 30 second timeframe.
FR 245A
Highly effective in multivalet and monovalet saturated complexes brines (example: 150-250,000 mg/l TDS). Fast activation ensures maximum pressure loss occurs within a 30 second timeframe.
FR 244A
Anionic Friction Reducer
FR 243A
Highly effective in very high calcium saturated brines (example: 24% – 32% CaCl2 brines). An excellent performer in API type brines; fast activation ensures maximum pressure loss occurs within a 30 second timeframe. Chemistry variations available designed for multiple applications.
FR 240A
Economical FR, fresh water to light brine
FR 235C
A synthetic organic polymer of high molecular weight and high cationic supplied as a rapidly hydrating emulsion. High brine; PHPA for coil tubing; cationic
FR 232A
Anionic Friction Reducer
FR 230C
Synthetic organic polymer of different molecular weight and medium/low cationic degree supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package; cationic
FR 230A
Fresh water to medium brine
FR 225CG
Synthetic organic polymer and Xanthan blend of high molecular weight and high cationic supplied as a rapidly hydrating emulsion. High brine; PHPA for coil tubing; cationic.
FR 220C
A synthetic organic polymer of different molecular weight and low cationic degree supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package; cationic
FR 220A
Anionic water-soluble polymer in emulsion; Exceptional performance in freshwater low brine and extremely high brine fluid conditions.
FR 211A
Anionic (<5% charge) polyacrylamide in water-in-oil emulsion. Stimulation/cement additive for drilling fluids; highly effective in fresh water/low brine applications.
FR 210N
Non-ionic FR
FR 150 A
Anionic FR, medium to high brine, builds viscosity. Viscosifier in brine systems for coiled tubing gel sweeps, HE-150 replacement
FR 140 C
Powder, cationic solids control product, durable performance, suitable in WBM.
FR 140 AP
Anionic Polyacrylamide in Water-in-Oil Emulsion/Flocculant
CL 100
Instant Borate Cross linker
Stream Clean 600
Full concentrate only; This product leaves tanks clean & smelling fresh with a fresh, citrus odor.
Stream Clean 500
Full Concentrate only; CONCENTRATED non hazardous environmentally safe solvent with emulsifying agent designed for dissolving Asphaltene and Paraffin deposits.
Stream Clean 400 DG
Suggested dilution: 5 to 1; A neutral liquid, solvent free, general purpose cleaner.
Stream Clean 300
Suggested dilution: 5 to 1; environmentally safe, tough-acting cleaning solvent, designed to take the place of highly volatile hydrocarbon solvents.
Stream Clean 200
Suggested dilution: 5 to 1; concentrated, highly alkaline emulsifier and cleaner, which is biodegradable, water soluble, non-flammable and non-toxic.
Stream Clean 111
Suggested dilution: 5 to 1; contains a unique deodorizing agent to control chemical odors during cleaning operations
Stream Clean 100
Suggested dilution: 5 to 1; industrial strength water soluble, nonflammable butyl solvent detergent degreaser
Clay Stabilizer
Lessens the swelling of the clay
PH Adjust 300
A high alkaline pH modifier agent for high alkaline fracturing fluid. It is used both in borate and zirconium cross-linked fluids where a pH of 10 or higher is needed for gel stability.
pH Adjust 300 contains potassium hydroxide and potassium carbonate in an aqueous solutions.
PH Adjust 100 SH
This is a high alkaline pH modifier and is primarily used to adjust the pH. Sodium Hydroxide based formula.
PH Adjust 100 PH
This is a high alkaline pH modifier and is primarily used to adjust the pH. Potassium Hydroxide based formula.
PC Non Caustic Buffer
Potassium Carbonate
Buffer 200
Low pH Buffer
Buffer 100
High pH Buffer
GB 400
Powdered Breaker (APS; Live/Non-Encapsulated)
GB 265
Liquid Enzyme Breaker
GB 100 E LT
Low Temp Encapsulated Breaker (APS)
GB 100 E HT
High temp encapsulated breaker (APS)
AD 100
Unique blend of surfactants and solvents designed to aid in the dispersion of asphaltenes and asphaltic materials into crude oil or aliphatic solvents. AD 100 acts to improve the stability of these mixtures and as well as reduce their pour points.
AD 200
Asphaltene Dispersant, heavy oil viscosity modifier aids in deposit removal
DF 200
General purpose defoamer for muds in freshwater or brine systems, oil and NPE-free
Activator
Highly effective intermediate for crude oil dehydration, water drop speed, desalting, and other applications for water-in-oil emulsion resolution.
DF 100
Water-based silicon defoamer, no mineral oil or FBS, performs well in a variety of applications
Q-60 Corrosion Inhibitor
Surfactant is a versatile and effective corrosion inhibitor for use in acid cleaning application.
PRP
PRP Powder encapsulates hydrocarbons, forming a physical matrix land and water, allowing remediation to take place.
Oil Buster
Oil Buster is a combination of PRP with different grades of ground corncob or other sorbent ingredients for use on hard surfaces.
Bio-Sok
Bio-Sok captures and biodegrades oil and fuel which leaks into a boat bilge, avoiding accidentally pumping of oil, fuel overboard and storm water.
Bio Boom
Vapor-X will encapsulate dangerous gases and suppress VOC’s thus reducing exposure. Vapor-X is an excellent hydrocarbon emulsifier it can be used effectively as a cleaner.
Vapor-x
Vapor-X will encapsulate dangerous gases and suppress VOC’s thus reducing exposure. Vapor-X is an excellent hydrocarbon emulsifier it can be used effectively as a cleaner.
WC 9840
Liquid nonionic, non-emulsifier surfactant developed for use in acidizing, cementing, and stimulation applications. The product effectively disperses and water wets oil coated, acid insoluble solids.
Well-Boom
Well Boom will facilitate testing in groundwater monitoring wells, absorbing contaminants in the well, and prevent hydrocarbons from leaching.
Scale Inhibitor 500
Neutralized Phosphonate Blend
Scale Inhibitor 300
Amine methylene phosphonic acid designed for scale prevention and treatment of calcium, magnesium, barium, strontium or iron scales.
Scale Inhibitor200
Hydroxyamino phosphate ester with low molecular weight polyacrylates designed as a scale preventive product for squeeze or continuous treatment of calcium carbonate, calcium, barium, and strontium sulfate across a broad pH range.
Pop 200
Reduction of torque and drag, as well as better control of bit weight
Pop 100
Eliminates torque and drag, prevents differential sticking, protects from corrosion
PPD 126 WS
Lower molecular weight synergistic blend of poly esters and surfactants designed for lower temperature melting points and wax appearance temperatures.
PPD 125 WS
A medium molecular weight copolymer ester based pour point depressant. Designed for pour point ranges between 20 and 35°C
Polyalkylated Phenol
Pour point depressant and wax dispersant. Modified to have better cold temperature performance and effective on both microcrystalline was and intermediate wax appearance temperatures.
Very high molecular weight inhibitor for waxes with a melting point range above 60°C
PPD 112 CM
Polyalkylated phenol – pour point depressant and wax dispersant. Modified to have better cold temperature performance and effective on both microcrystalline was and intermediate wax appearance temperatures.
PPD 110 CM
High molecular weight crystal modifier and dispersant combination. Excellent for high melting point waxes and Wax appearance temperature between 30 – 50 °C
SD 110
A blend of solvents and surfactants designed to disperse hydrocarbon sludge containing a mix of waxes and asphaltenes
Paraffin Inhibitor
Oil soluble blend of wax crystal modifiers, dispersants and polar solvents designed for application in down hole remedial treatments.
PD 17 RTU
Paraffin Dispersant/Solvent; Great for well clean out’s; excellent broad spectrum wax dissolver; aids in the removal of waxy deposits; excellent well stimulation chemistry
PD 16
Exhibiting excellent paraffin and sludge penetration while neutralizing paraffin bonds to disperse sludge and prevent plugging of tubular goods and surface flow lines.
Mea Triazine
MEA-TRIAZINE is a water-soluble formulation of Triazine designed to remove hydrogen sulfide (H2S) from production systems.
DFA 100
Cement fluid loss additive
Primary Emulsifier
Primary emulsifier for formulating invert drilling fluids, provides fluid loss, used with AR-Combo Emulsifier
Combo Emulsifier
Primary and Secondary emulsifier, fluid loss in oil-based drilling fluids
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Bonding Catalyst
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
GS 22 Passivator
This solution will quickly remove Oxides/ Scales with minimal loss of base metal. This acid deoxidizer has exceptional detergency and corrosion inhibitor and passivation.
WT-4450
Broad spectrum biocide used to control sulfate reducing bacteria
Tetris 75
Antibacterial 75% concentration. Excellent to dissolve Iron Sulfide
Tetris 50
Antibacterial 50% concentration. Excellent to dissolve Iron Sulfide
Glut 25 & Glut 50
Glut Water Treatment Agent
Bio-Daz
Antibacterial that could kill for up to 2 -3 weeks. In some case bacteria is eliminated for up to 6 months.
X-400
4.0lb Xanthan gum slurry
DFA 100
Drilling Mud Additive in fresh water and brines, tolerant in high temperature, Xanthan replacement, viscosification
Sweep-A
Freshwater viscosifier for coiled tubing gel sweeps
Surfactant MW
Surfactant (Microemulsion)
NI-NE 100
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
COAG 100
Polyamines. High charge, relatively low molecular weights compared to dewatering polymers. They are replacements for Alum & FeCl3 in that they have high charge but much high molecular weights and work well as coagulants prior to solids dewatering.
PA 100C
Cationic polyacrylamide in water – in – oil emulsion / flocculant
FR 7290
Synthetic cationic organic polymer of highmolecular weight and high cationic charge supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package.
DFA 100
A high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of cationic charge. FL-120C FG is supplied in a free-flowing fine prill and microbead form that allows for rapid hydration & suspension in carrier fluids. The FL-120C FG Series provides exceptional performance in freshwater and low brine fluid conditions.
FL 100 C Pf
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of cationic charge. The product is supplied in a free-flowing fine prill and microbead form that allows for rapid hydration & suspension in carrier fluids. The FL-110C PF Series provides exceptional performance in freshwater and low brine fluid conditions. Chemistry variations available designed for multiple applications.
Bonding Catalyst
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
COAG 200
Poly DADMAC’s high charge, relatively low molecular weights compared to dewatering polymers. They are replacements for Alum & FeCl3 in that they have high charge but much high molecular weights and work well as coagulants prior to solids dewatering.
Oxygen Scavenger 200
Water soluble Ammonium Bisulfite Solution with Nickel Catalyst concentrate designed for use in oil field applications.
Oxygen Scavenger 100
Minimizes corrosion rates, 48 to 52% active catalyzed ammonium bisulfite solution that functions as a liquid oxygen scavenger for use in all types of water systems
Lube 150
Water-based drilling mud lubricant, tolerant in high temperature, viscosification
KCL-Sub
Liquid Potassium Chloride Substitute
Iron Control
Prevents Iron precipitation during flow back
GS-100 Guar Slurry
4.0lb Liquid Guar Slurry (40/45) and 4.0lb Liquid Guar Slurry (35/40)
FR-230AW
Winterized, fresh water to medium brine
FR-200
Anionic Friction Reducer (High brine/ Divalent)
FR 499 A
A medium molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a very high degree of anionic charge. FR-499 A is supplied in a free-flowing dry granular powder form. The FR-499 A Series provides exceptional performance in freshwater and low brine fluid conditions.
FR 340 VHA
High molecular weight, synthetic organic polyacrylamide based flocculant, which exhibits a high degree of anionic charge. FR-340 VHA is supplied in a free-flowing dry granular powder form.
FR 340 UHA
A ultra high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a high degree of anionic charge. FR-340 UHA is supplied in a free-flowing dry granular powder form. The FR-340 UHA Series provides exceptional performance in freshwater and low brine fluid conditions.
FR 340 A G
A high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a high degree of anionic charge. FR-340 A is supplied in a free-flowing dry granular powder form. The FR-340 A Series provides exceptional performance in freshwater and low brine
FR 330 UHA
Powder, anionic solids control product, suitable in WBM and OBM
FR 330 A
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a medium degree of anionic charge. FR-330 A is supplied in a free-flowing dry granular powder form. The FR-330 A Series provides exceptional performance in freshwater & low brine fluid conditions.
FR 315 A FG
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of anionic charge. FR 315 A FG is supplied in a free-flowing dry granular powder form. Fresh and high brine; dry anionic, fine grind
FR 310 LA
Powder, anionic solids control product, suitable in WBM
FR 300 LA FG
High molecular weight, granular, dry synthetic organic polyacrylamide based flocculent, which exhibits a very low degree of anionic charge. Fresh and high brine; dry anionic, fine grind
FR 252 AG
High purity hydrolyzed anionic emulsion AMPS co-polymer and Xanthan blend dispersed in a water and limited oil soluble carrier. AMPS-high brine, high temperature, high pressure; anionic. Chemistry variations available designed for multiple applications.
FR 250 A
Anionic FR, Sulfonated, medium to high brine
FR 248 A
Anionic Friction Reducer
FR 247A
Highly effective in multivalet and monovalet saturated complexes brines (example: 40-110,000 mg/l TDS). Fast activation ensures maximum pressure loss occurs within a 30 second timeframe.
FR 245A
Highly effective in multivalet and monovalet saturated complexes brines (example: 150-250,000 mg/l TDS). Fast activation ensures maximum pressure loss occurs within a 30 second timeframe.
FR 244A
Anionic Friction Reducer
FR 243A
Highly effective in very high calcium saturated brines (example: 24% – 32% CaCl2 brines). An excellent performer in API type brines; fast activation ensures maximum pressure loss occurs within a 30 second timeframe. Chemistry variations available designed for multiple applications.
FR 240A
Economical FR, fresh water to light brine
FR 235C
A synthetic organic polymer of high molecular weight and high cationic supplied as a rapidly hydrating emulsion. High brine; PHPA for coil tubing; cationic
FR 232A
Anionic Friction Reducer
FR 230C
Synthetic organic polymer of different molecular weight and medium/low cationic degree supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package; cationic
FR 230A
Fresh water to medium brine
FR 225CG
Synthetic organic polymer and Xanthan blend of high molecular weight and high cationic supplied as a rapidly hydrating emulsion. High brine; PHPA for coil tubing; cationic.
FR 220C
A synthetic organic polymer of different molecular weight and low cationic degree supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package; cationic
FR 220A
Anionic water-soluble polymer in emulsion; Exceptional performance in freshwater low brine and extremely high brine fluid conditions.
FR 211A
Anionic (<5% charge) polyacrylamide in water-in-oil emulsion. Stimulation/cement additive for drilling fluids; highly effective in fresh water/low brine applications.
FR 210N
Non-ionic FR
FR 150 A
Anionic FR, medium to high brine, builds viscosity. Viscosifier in brine systems for coiled tubing gel sweeps, HE-150 replacement
FR 140 C
Powder, cationic solids control product, durable performance, suitable in WBM.
FR 140 AP
Anionic Polyacrylamide in Water-in-Oil Emulsion/Flocculant
CL 100
Instant Borate Cross linker
Stream Clean 600
Full concentrate only; This product leaves tanks clean & smelling fresh with a fresh, citrus odor.
Stream Clean 500
Full Concentrate only; CONCENTRATED non hazardous environmentally safe solvent with emulsifying agent designed for dissolving Asphaltene and Paraffin deposits.
Stream Clean 400 DG
Suggested dilution: 5 to 1; A neutral liquid, solvent free, general purpose cleaner.
Stream Clean 300
Suggested dilution: 5 to 1; environmentally safe, tough-acting cleaning solvent, designed to take the place of highly volatile hydrocarbon solvents.
Stream Clean 200
Suggested dilution: 5 to 1; concentrated, highly alkaline emulsifier and cleaner, which is biodegradable, water soluble, non-flammable and non-toxic.
Stream Clean 111
Suggested dilution: 5 to 1; contains a unique deodorizing agent to control chemical odors during cleaning operations
Stream Clean 100
Suggested dilution: 5 to 1; industrial strength water soluble, nonflammable butyl solvent detergent degreaser
Clay Stabilizer
Lessens the swelling of the clay
PH Adjust 300
A high alkaline pH modifier agent for high alkaline fracturing fluid. It is used both in borate and zirconium cross-linked fluids where a pH of 10 or higher is needed for gel stability.
pH Adjust 300 contains potassium hydroxide and potassium carbonate in an aqueous solutions.
PH Adjust 100 SH
This is a high alkaline pH modifier and is primarily used to adjust the pH. Sodium Hydroxide based formula.
PH Adjust 100 PH
This is a high alkaline pH modifier and is primarily used to adjust the pH. Potassium Hydroxide based formula.
PC Non Caustic Buffer
Potassium Carbonate
Buffer 200
Low pH Buffer
Buffer 100
High pH Buffer
GB 400
Powdered Breaker (APS; Live/Non-Encapsulated)
GB 265
Liquid Enzyme Breaker
GB 100 E LT
Low Temp Encapsulated Breaker (APS)
GB 100 E HT
High temp encapsulated breaker (APS)
AD 100
Unique blend of surfactants and solvents designed to aid in the dispersion of asphaltenes and asphaltic materials into crude oil or aliphatic solvents. AD 100 acts to improve the stability of these mixtures and as well as reduce their pour points.
AD 200
Asphaltene Dispersant, heavy oil viscosity modifier aids in deposit removal
DF 200
General purpose defoamer for muds in freshwater or brine systems, oil and NPE-free
Activator
Highly effective intermediate for crude oil dehydration, water drop speed, desalting, and other applications for water-in-oil emulsion resolution.
DF 100
Water-based silicon defoamer, no mineral oil or FBS, performs well in a variety of applications
Q-60 Corrosion Inhibitor
Surfactant is a versatile and effective corrosion inhibitor for use in acid cleaning application.
PRP
PRP Powder encapsulates hydrocarbons, forming a physical matrix land and water, allowing remediation to take place.
Oil Buster
Oil Buster is a combination of PRP with different grades of ground corncob or other sorbent ingredients for use on hard surfaces.
Bio-Sok
Bio-Sok captures and biodegrades oil and fuel which leaks into a boat bilge, avoiding accidentally pumping of oil, fuel overboard and storm water.
Bio Boom
Vapor-X will encapsulate dangerous gases and suppress VOC’s thus reducing exposure. Vapor-X is an excellent hydrocarbon emulsifier it can be used effectively as a cleaner.
Vapor-x
Vapor-X will encapsulate dangerous gases and suppress VOC’s thus reducing exposure. Vapor-X is an excellent hydrocarbon emulsifier it can be used effectively as a cleaner.
WC 9840
Liquid nonionic, non-emulsifier surfactant developed for use in acidizing, cementing, and stimulation applications. The product effectively disperses and water wets oil coated, acid insoluble solids.
Well-Boom
Well Boom will facilitate testing in groundwater monitoring wells, absorbing contaminants in the well, and prevent hydrocarbons from leaching.
Scale Inhibitor 500
Neutralized Phosphonate Blend
Scale Inhibitor 300
Amine methylene phosphonic acid designed for scale prevention and treatment of calcium, magnesium, barium, strontium or iron scales.
Scale Inhibitor200
Hydroxyamino phosphate ester with low molecular weight polyacrylates designed as a scale preventive product for squeeze or continuous treatment of calcium carbonate, calcium, barium, and strontium sulfate across a broad pH range.
Pop 200
Reduction of torque and drag, as well as better control of bit weight
Pop 100
Eliminates torque and drag, prevents differential sticking, protects from corrosion
PPD 126 WS
Lower molecular weight synergistic blend of poly esters and surfactants designed for lower temperature melting points and wax appearance temperatures.
PPD 125 WS
A medium molecular weight copolymer ester based pour point depressant. Designed for pour point ranges between 20 and 35°C
Polyalkylated Phenol
Pour point depressant and wax dispersant. Modified to have better cold temperature performance and effective on both microcrystalline was and intermediate wax appearance temperatures.
Very high molecular weight inhibitor for waxes with a melting point range above 60°C
PPD 112 CM
Polyalkylated phenol – pour point depressant and wax dispersant. Modified to have better cold temperature performance and effective on both microcrystalline was and intermediate wax appearance temperatures.
PPD 110 CM
High molecular weight crystal modifier and dispersant combination. Excellent for high melting point waxes and Wax appearance temperature between 30 – 50 °C
SD 110
A blend of solvents and surfactants designed to disperse hydrocarbon sludge containing a mix of waxes and asphaltenes
Paraffin Inhibitor
Oil soluble blend of wax crystal modifiers, dispersants and polar solvents designed for application in down hole remedial treatments.
PD 17 RTU
Paraffin Dispersant/Solvent; Great for well clean out’s; excellent broad spectrum wax dissolver; aids in the removal of waxy deposits; excellent well stimulation chemistry
PD 16
Exhibiting excellent paraffin and sludge penetration while neutralizing paraffin bonds to disperse sludge and prevent plugging of tubular goods and surface flow lines.
Mea Triazine
MEA-TRIAZINE is a water-soluble formulation of Triazine designed to remove hydrogen sulfide (H2S) from production systems.
DFA 100
Cement fluid loss additive
Primary Emulsifier
Primary emulsifier for formulating invert drilling fluids, provides fluid loss, used with AR-Combo Emulsifier
Combo Emulsifier
Primary and Secondary emulsifier, fluid loss in oil-based drilling fluids
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Bonding Catalyst
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
GS 22 Passivator
This solution will quickly remove Oxides/ Scales with minimal loss of base metal. This acid deoxidizer has exceptional detergency and corrosion inhibitor and passivation.
WT-4450
Broad spectrum biocide used to control sulfate reducing bacteria
Tetris 75
Antibacterial 75% concentration. Excellent to dissolve Iron Sulfide
Tetris 50
Antibacterial 50% concentration. Excellent to dissolve Iron Sulfide
Glut 25 & Glut 50
Glut Water Treatment Agent
Bio-Daz
Antibacterial that could kill for up to 2 -3 weeks. In some case bacteria is eliminated for up to 6 months.
X-400
4.0lb Xanthan gum slurry
DFA 100
Drilling Mud Additive in fresh water and brines, tolerant in high temperature, Xanthan replacement, viscosification
Sweep-A
Freshwater viscosifier for coiled tubing gel sweeps
Surfactant MW
Surfactant (Microemulsion)
NI-NE 100
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
COAG 100
Polyamines. High charge, relatively low molecular weights compared to dewatering polymers. They are replacements for Alum & FeCl3 in that they have high charge but much high molecular weights and work well as coagulants prior to solids dewatering.
PA 100C
Cationic polyacrylamide in water – in – oil emulsion / flocculant
FR 7290
Synthetic cationic organic polymer of highmolecular weight and high cationic charge supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package.
DFA 100
A high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of cationic charge. FL-120C FG is supplied in a free-flowing fine prill and microbead form that allows for rapid hydration & suspension in carrier fluids. The FL-120C FG Series provides exceptional performance in freshwater and low brine fluid conditions.
FL 100 C Pf
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of cationic charge. The product is supplied in a free-flowing fine prill and microbead form that allows for rapid hydration & suspension in carrier fluids. The FL-110C PF Series provides exceptional performance in freshwater and low brine fluid conditions. Chemistry variations available designed for multiple applications.
Bonding Catalyst
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
COAG 200
Poly DADMAC’s high charge, relatively low molecular weights compared to dewatering polymers. They are replacements for Alum & FeCl3 in that they have high charge but much high molecular weights and work well as coagulants prior to solids dewatering.
Oxygen Scavenger 200
Water soluble Ammonium Bisulfite Solution with Nickel Catalyst concentrate designed for use in oil field applications.
Oxygen Scavenger 100
Minimizes corrosion rates, 48 to 52% active catalyzed ammonium bisulfite solution that functions as a liquid oxygen scavenger for use in all types of water systems
Lube 150
Water-based drilling mud lubricant, tolerant in high temperature, viscosification
KCL-Sub
Liquid Potassium Chloride Substitute
Iron Control
Prevents Iron precipitation during flow back
GS-100 Guar Slurry
4.0lb Liquid Guar Slurry (40/45) and 4.0lb Liquid Guar Slurry (35/40)
FR-230AW
Winterized, fresh water to medium brine
FR-200
Anionic Friction Reducer (High brine/ Divalent)
FR 499 A
A medium molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a very high degree of anionic charge. FR-499 A is supplied in a free-flowing dry granular powder form. The FR-499 A Series provides exceptional performance in freshwater and low brine fluid conditions.
FR 340 VHA
High molecular weight, synthetic organic polyacrylamide based flocculant, which exhibits a high degree of anionic charge. FR-340 VHA is supplied in a free-flowing dry granular powder form.
FR 340 UHA
A ultra high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a high degree of anionic charge. FR-340 UHA is supplied in a free-flowing dry granular powder form. The FR-340 UHA Series provides exceptional performance in freshwater and low brine fluid conditions.
FR 340 A G
A high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a high degree of anionic charge. FR-340 A is supplied in a free-flowing dry granular powder form. The FR-340 A Series provides exceptional performance in freshwater and low brine
FR 330 UHA
Powder, anionic solids control product, suitable in WBM and OBM
FR 330 A
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a medium degree of anionic charge. FR-330 A is supplied in a free-flowing dry granular powder form. The FR-330 A Series provides exceptional performance in freshwater & low brine fluid conditions.
FR 315 A FG
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of anionic charge. FR 315 A FG is supplied in a free-flowing dry granular powder form. Fresh and high brine; dry anionic, fine grind
FR 310 LA
Powder, anionic solids control product, suitable in WBM
FR 300 LA FG
High molecular weight, granular, dry synthetic organic polyacrylamide based flocculent, which exhibits a very low degree of anionic charge. Fresh and high brine; dry anionic, fine grind
FR 252 AG
High purity hydrolyzed anionic emulsion AMPS co-polymer and Xanthan blend dispersed in a water and limited oil soluble carrier. AMPS-high brine, high temperature, high pressure; anionic. Chemistry variations available designed for multiple applications.
FR 250 A
Anionic FR, Sulfonated, medium to high brine
FR 248 A
Anionic Friction Reducer
FR 247A
Highly effective in multivalet and monovalet saturated complexes brines (example: 40-110,000 mg/l TDS). Fast activation ensures maximum pressure loss occurs within a 30 second timeframe.
FR 245A
Highly effective in multivalet and monovalet saturated complexes brines (example: 150-250,000 mg/l TDS). Fast activation ensures maximum pressure loss occurs within a 30 second timeframe.
FR 244A
Anionic Friction Reducer
FR 243A
Highly effective in very high calcium saturated brines (example: 24% – 32% CaCl2 brines). An excellent performer in API type brines; fast activation ensures maximum pressure loss occurs within a 30 second timeframe. Chemistry variations available designed for multiple applications.
FR 240A
Economical FR, fresh water to light brine
FR 235C
A synthetic organic polymer of high molecular weight and high cationic supplied as a rapidly hydrating emulsion. High brine; PHPA for coil tubing; cationic
FR 232A
Anionic Friction Reducer
FR 230C
Synthetic organic polymer of different molecular weight and medium/low cationic degree supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package; cationic
FR 230A
Fresh water to medium brine
FR 225CG
Synthetic organic polymer and Xanthan blend of high molecular weight and high cationic supplied as a rapidly hydrating emulsion. High brine; PHPA for coil tubing; cationic.
FR 220C
A synthetic organic polymer of different molecular weight and low cationic degree supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package; cationic
FR 220A
Anionic water-soluble polymer in emulsion; Exceptional performance in freshwater low brine and extremely high brine fluid conditions.
FR 211A
Anionic (<5% charge) polyacrylamide in water-in-oil emulsion. Stimulation/cement additive for drilling fluids; highly effective in fresh water/low brine applications.
FR 210N
Non-ionic FR
FR 150 A
Anionic FR, medium to high brine, builds viscosity. Viscosifier in brine systems for coiled tubing gel sweeps, HE-150 replacement
FR 140 C
Powder, cationic solids control product, durable performance, suitable in WBM.
FR 140 AP
Anionic Polyacrylamide in Water-in-Oil Emulsion/Flocculant
CL 100
Instant Borate Cross linker
Stream Clean 600
Full concentrate only; This product leaves tanks clean & smelling fresh with a fresh, citrus odor.
Stream Clean 500
Full Concentrate only; CONCENTRATED non hazardous environmentally safe solvent with emulsifying agent designed for dissolving Asphaltene and Paraffin deposits.
Stream Clean 400 DG
Suggested dilution: 5 to 1; A neutral liquid, solvent free, general purpose cleaner.
Stream Clean 300
Suggested dilution: 5 to 1; environmentally safe, tough-acting cleaning solvent, designed to take the place of highly volatile hydrocarbon solvents.
Stream Clean 200
Suggested dilution: 5 to 1; concentrated, highly alkaline emulsifier and cleaner, which is biodegradable, water soluble, non-flammable and non-toxic.
Stream Clean 111
Suggested dilution: 5 to 1; contains a unique deodorizing agent to control chemical odors during cleaning operations
Stream Clean 100
Suggested dilution: 5 to 1; industrial strength water soluble, nonflammable butyl solvent detergent degreaser
Clay Stabilizer
Lessens the swelling of the clay
PH Adjust 300
A high alkaline pH modifier agent for high alkaline fracturing fluid. It is used both in borate and zirconium cross-linked fluids where a pH of 10 or higher is needed for gel stability.
pH Adjust 300 contains potassium hydroxide and potassium carbonate in an aqueous solutions.
PH Adjust 100 SH
This is a high alkaline pH modifier and is primarily used to adjust the pH. Sodium Hydroxide based formula.
PH Adjust 100 PH
This is a high alkaline pH modifier and is primarily used to adjust the pH. Potassium Hydroxide based formula.
PC Non Caustic Buffer
Potassium Carbonate
Buffer 200
Low pH Buffer
Buffer 100
High pH Buffer
GB 400
Powdered Breaker (APS; Live/Non-Encapsulated)
GB 265
Liquid Enzyme Breaker
GB 100 E LT
Low Temp Encapsulated Breaker (APS)
GB 100 E HT
High temp encapsulated breaker (APS)
AD 100
Unique blend of surfactants and solvents designed to aid in the dispersion of asphaltenes and asphaltic materials into crude oil or aliphatic solvents. AD 100 acts to improve the stability of these mixtures and as well as reduce their pour points.
AD 200
Asphaltene Dispersant, heavy oil viscosity modifier aids in deposit removal
DF 200
General purpose defoamer for muds in freshwater or brine systems, oil and NPE-free
Activator
Highly effective intermediate for crude oil dehydration, water drop speed, desalting, and other applications for water-in-oil emulsion resolution.
DF 100
Water-based silicon defoamer, no mineral oil or FBS, performs well in a variety of applications
Q-60 Corrosion Inhibitor
Surfactant is a versatile and effective corrosion inhibitor for use in acid cleaning application.
PRP
PRP Powder encapsulates hydrocarbons, forming a physical matrix land and water, allowing remediation to take place.
Oil Buster
Oil Buster is a combination of PRP with different grades of ground corncob or other sorbent ingredients for use on hard surfaces.
Bio-Sok
Bio-Sok captures and biodegrades oil and fuel which leaks into a boat bilge, avoiding accidentally pumping of oil, fuel overboard and storm water.
Bio Boom
Vapor-X will encapsulate dangerous gases and suppress VOC’s thus reducing exposure. Vapor-X is an excellent hydrocarbon emulsifier it can be used effectively as a cleaner.
Vapor-x
Vapor-X will encapsulate dangerous gases and suppress VOC’s thus reducing exposure. Vapor-X is an excellent hydrocarbon emulsifier it can be used effectively as a cleaner.
WC 9840
Liquid nonionic, non-emulsifier surfactant developed for use in acidizing, cementing, and stimulation applications. The product effectively disperses and water wets oil coated, acid insoluble solids.
Well-Boom
Well Boom will facilitate testing in groundwater monitoring wells, absorbing contaminants in the well, and prevent hydrocarbons from leaching.
Scale Inhibitor 500
Neutralized Phosphonate Blend
Scale Inhibitor 300
Amine methylene phosphonic acid designed for scale prevention and treatment of calcium, magnesium, barium, strontium or iron scales.
Scale Inhibitor200
Hydroxyamino phosphate ester with low molecular weight polyacrylates designed as a scale preventive product for squeeze or continuous treatment of calcium carbonate, calcium, barium, and strontium sulfate across a broad pH range.
Pop 200
Reduction of torque and drag, as well as better control of bit weight
Pop 100
Eliminates torque and drag, prevents differential sticking, protects from corrosion
PPD 126 WS
Lower molecular weight synergistic blend of poly esters and surfactants designed for lower temperature melting points and wax appearance temperatures.
PPD 125 WS
A medium molecular weight copolymer ester based pour point depressant. Designed for pour point ranges between 20 and 35°C
Polyalkylated Phenol
Pour point depressant and wax dispersant. Modified to have better cold temperature performance and effective on both microcrystalline was and intermediate wax appearance temperatures.
Very high molecular weight inhibitor for waxes with a melting point range above 60°C
PPD 112 CM
Polyalkylated phenol – pour point depressant and wax dispersant. Modified to have better cold temperature performance and effective on both microcrystalline was and intermediate wax appearance temperatures.
PPD 110 CM
High molecular weight crystal modifier and dispersant combination. Excellent for high melting point waxes and Wax appearance temperature between 30 – 50 °C
SD 110
A blend of solvents and surfactants designed to disperse hydrocarbon sludge containing a mix of waxes and asphaltenes
Paraffin Inhibitor
Oil soluble blend of wax crystal modifiers, dispersants and polar solvents designed for application in down hole remedial treatments.
PD 17 RTU
Paraffin Dispersant/Solvent; Great for well clean out’s; excellent broad spectrum wax dissolver; aids in the removal of waxy deposits; excellent well stimulation chemistry
PD 16
Exhibiting excellent paraffin and sludge penetration while neutralizing paraffin bonds to disperse sludge and prevent plugging of tubular goods and surface flow lines.
Mea Triazine
MEA-TRIAZINE is a water-soluble formulation of Triazine designed to remove hydrogen sulfide (H2S) from production systems.
DFA 100
Cement fluid loss additive
Primary Emulsifier
Primary emulsifier for formulating invert drilling fluids, provides fluid loss, used with AR-Combo Emulsifier
Combo Emulsifier
Primary and Secondary emulsifier, fluid loss in oil-based drilling fluids
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Bonding Catalyst
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
GS 22 Passivator
This solution will quickly remove Oxides/ Scales with minimal loss of base metal. This acid deoxidizer has exceptional detergency and corrosion inhibitor and passivation.
WT-4450
Broad spectrum biocide used to control sulfate reducing bacteria
Tetris 75
Antibacterial 75% concentration. Excellent to dissolve Iron Sulfide
Tetris 50
Antibacterial 50% concentration. Excellent to dissolve Iron Sulfide
Glut 25 & Glut 50
Glut Water Treatment Agent
Bio-Daz
Antibacterial that could kill for up to 2 -3 weeks. In some case bacteria is eliminated for up to 6 months.
X-400
4.0lb Xanthan gum slurry
DFA 100
Drilling Mud Additive in fresh water and brines, tolerant in high temperature, Xanthan replacement, viscosification
Sweep-A
Freshwater viscosifier for coiled tubing gel sweeps
Surfactant MW
Surfactant (Microemulsion)
NI-NE 100
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
COAG 100
Polyamines. High charge, relatively low molecular weights compared to dewatering polymers. They are replacements for Alum & FeCl3 in that they have high charge but much high molecular weights and work well as coagulants prior to solids dewatering.
PA 100C
Cationic polyacrylamide in water – in – oil emulsion / flocculant
FR 7290
Synthetic cationic organic polymer of highmolecular weight and high cationic charge supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package.
DFA 100
A high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of cationic charge. FL-120C FG is supplied in a free-flowing fine prill and microbead form that allows for rapid hydration & suspension in carrier fluids. The FL-120C FG Series provides exceptional performance in freshwater and low brine fluid conditions.
FL 100 C Pf
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of cationic charge. The product is supplied in a free-flowing fine prill and microbead form that allows for rapid hydration & suspension in carrier fluids. The FL-110C PF Series provides exceptional performance in freshwater and low brine fluid conditions. Chemistry variations available designed for multiple applications.
Bonding Catalyst
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
COAG 200
Poly DADMAC’s high charge, relatively low molecular weights compared to dewatering polymers. They are replacements for Alum & FeCl3 in that they have high charge but much high molecular weights and work well as coagulants prior to solids dewatering.
Oxygen Scavenger 200
Water soluble Ammonium Bisulfite Solution with Nickel Catalyst concentrate designed for use in oil field applications.
Oxygen Scavenger 100
Minimizes corrosion rates, 48 to 52% active catalyzed ammonium bisulfite solution that functions as a liquid oxygen scavenger for use in all types of water systems
Lube 150
Water-based drilling mud lubricant, tolerant in high temperature, viscosification
KCL-Sub
Liquid Potassium Chloride Substitute
Iron Control
Prevents Iron precipitation during flow back
GS-100 Guar Slurry
4.0lb Liquid Guar Slurry (40/45) and 4.0lb Liquid Guar Slurry (35/40)
FR-230AW
Winterized, fresh water to medium brine
FR-200
Anionic Friction Reducer (High brine/ Divalent)
FR 499 A
A medium molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a very high degree of anionic charge. FR-499 A is supplied in a free-flowing dry granular powder form. The FR-499 A Series provides exceptional performance in freshwater and low brine fluid conditions.
FR 340 VHA
High molecular weight, synthetic organic polyacrylamide based flocculant, which exhibits a high degree of anionic charge. FR-340 VHA is supplied in a free-flowing dry granular powder form.
FR 340 UHA
A ultra high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a high degree of anionic charge. FR-340 UHA is supplied in a free-flowing dry granular powder form. The FR-340 UHA Series provides exceptional performance in freshwater and low brine fluid conditions.
FR 340 A G
A high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a high degree of anionic charge. FR-340 A is supplied in a free-flowing dry granular powder form. The FR-340 A Series provides exceptional performance in freshwater and low brine
FR 330 UHA
Powder, anionic solids control product, suitable in WBM and OBM
FR 330 A
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a medium degree of anionic charge. FR-330 A is supplied in a free-flowing dry granular powder form. The FR-330 A Series provides exceptional performance in freshwater & low brine fluid conditions.
FR 315 A FG
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of anionic charge. FR 315 A FG is supplied in a free-flowing dry granular powder form. Fresh and high brine; dry anionic, fine grind
FR 310 LA
Powder, anionic solids control product, suitable in WBM
FR 300 LA FG
High molecular weight, granular, dry synthetic organic polyacrylamide based flocculent, which exhibits a very low degree of anionic charge. Fresh and high brine; dry anionic, fine grind
FR 252 AG
High purity hydrolyzed anionic emulsion AMPS co-polymer and Xanthan blend dispersed in a water and limited oil soluble carrier. AMPS-high brine, high temperature, high pressure; anionic. Chemistry variations available designed for multiple applications.
FR 250 A
Anionic FR, Sulfonated, medium to high brine
FR 248 A
Anionic Friction Reducer
FR 247A
Highly effective in multivalet and monovalet saturated complexes brines (example: 40-110,000 mg/l TDS). Fast activation ensures maximum pressure loss occurs within a 30 second timeframe.
FR 245A
Highly effective in multivalet and monovalet saturated complexes brines (example: 150-250,000 mg/l TDS). Fast activation ensures maximum pressure loss occurs within a 30 second timeframe.
FR 244A
Anionic Friction Reducer
FR 243A
Highly effective in very high calcium saturated brines (example: 24% – 32% CaCl2 brines). An excellent performer in API type brines; fast activation ensures maximum pressure loss occurs within a 30 second timeframe. Chemistry variations available designed for multiple applications.
FR 240A
Economical FR, fresh water to light brine
FR 235C
A synthetic organic polymer of high molecular weight and high cationic supplied as a rapidly hydrating emulsion. High brine; PHPA for coil tubing; cationic
FR 232A
Anionic Friction Reducer
FR 230C
Synthetic organic polymer of different molecular weight and medium/low cationic degree supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package; cationic
FR 230A
Fresh water to medium brine
FR 225CG
Synthetic organic polymer and Xanthan blend of high molecular weight and high cationic supplied as a rapidly hydrating emulsion. High brine; PHPA for coil tubing; cationic.
FR 220C
A synthetic organic polymer of different molecular weight and low cationic degree supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package; cationic
FR 220A
Anionic water-soluble polymer in emulsion; Exceptional performance in freshwater low brine and extremely high brine fluid conditions.
FR 211A
Anionic (<5% charge) polyacrylamide in water-in-oil emulsion. Stimulation/cement additive for drilling fluids; highly effective in fresh water/low brine applications.
FR 210N
Non-ionic FR
FR 150 A
Anionic FR, medium to high brine, builds viscosity. Viscosifier in brine systems for coiled tubing gel sweeps, HE-150 replacement
FR 140 C
Powder, cationic solids control product, durable performance, suitable in WBM.
FR 140 AP
Anionic Polyacrylamide in Water-in-Oil Emulsion/Flocculant
CL 100
Instant Borate Cross linker
Stream Clean 600
Full concentrate only; This product leaves tanks clean & smelling fresh with a fresh, citrus odor.
Stream Clean 500
Full Concentrate only; CONCENTRATED non hazardous environmentally safe solvent with emulsifying agent designed for dissolving Asphaltene and Paraffin deposits.
Stream Clean 400 DG
Suggested dilution: 5 to 1; A neutral liquid, solvent free, general purpose cleaner.
Stream Clean 300
Suggested dilution: 5 to 1; environmentally safe, tough-acting cleaning solvent, designed to take the place of highly volatile hydrocarbon solvents.
Stream Clean 200
Suggested dilution: 5 to 1; concentrated, highly alkaline emulsifier and cleaner, which is biodegradable, water soluble, non-flammable and non-toxic.
Stream Clean 111
Suggested dilution: 5 to 1; contains a unique deodorizing agent to control chemical odors during cleaning operations
Stream Clean 100
Suggested dilution: 5 to 1; industrial strength water soluble, nonflammable butyl solvent detergent degreaser
Clay Stabilizer
Lessens the swelling of the clay
PH Adjust 300
A high alkaline pH modifier agent for high alkaline fracturing fluid. It is used both in borate and zirconium cross-linked fluids where a pH of 10 or higher is needed for gel stability.
pH Adjust 300 contains potassium hydroxide and potassium carbonate in an aqueous solutions.
PH Adjust 100 SH
This is a high alkaline pH modifier and is primarily used to adjust the pH. Sodium Hydroxide based formula.
PH Adjust 100 PH
This is a high alkaline pH modifier and is primarily used to adjust the pH. Potassium Hydroxide based formula.
PC Non Caustic Buffer
Potassium Carbonate
Buffer 200
Low pH Buffer
Buffer 100
High pH Buffer
GB 400
Powdered Breaker (APS; Live/Non-Encapsulated)
GB 265
Liquid Enzyme Breaker
GB 100 E LT
Low Temp Encapsulated Breaker (APS)
GB 100 E HT
High temp encapsulated breaker (APS)
AD 100
Unique blend of surfactants and solvents designed to aid in the dispersion of asphaltenes and asphaltic materials into crude oil or aliphatic solvents. AD 100 acts to improve the stability of these mixtures and as well as reduce their pour points.
AD 200
Asphaltene Dispersant, heavy oil viscosity modifier aids in deposit removal
DF 200
General purpose defoamer for muds in freshwater or brine systems, oil and NPE-free
Activator
Highly effective intermediate for crude oil dehydration, water drop speed, desalting, and other applications for water-in-oil emulsion resolution.
DF 100
Water-based silicon defoamer, no mineral oil or FBS, performs well in a variety of applications
Q-60 Corrosion Inhibitor
Surfactant is a versatile and effective corrosion inhibitor for use in acid cleaning application.
PRP
PRP Powder encapsulates hydrocarbons, forming a physical matrix land and water, allowing remediation to take place.
Oil Buster
Oil Buster is a combination of PRP with different grades of ground corncob or other sorbent ingredients for use on hard surfaces.
Bio-Sok
Bio-Sok captures and biodegrades oil and fuel which leaks into a boat bilge, avoiding accidentally pumping of oil, fuel overboard and storm water.
Bio Boom
Vapor-X will encapsulate dangerous gases and suppress VOC’s thus reducing exposure. Vapor-X is an excellent hydrocarbon emulsifier it can be used effectively as a cleaner.
Vapor-x
Vapor-X will encapsulate dangerous gases and suppress VOC’s thus reducing exposure. Vapor-X is an excellent hydrocarbon emulsifier it can be used effectively as a cleaner.
WC 9840
Liquid nonionic, non-emulsifier surfactant developed for use in acidizing, cementing, and stimulation applications. The product effectively disperses and water wets oil coated, acid insoluble solids.
Well-Boom
Well Boom will facilitate testing in groundwater monitoring wells, absorbing contaminants in the well, and prevent hydrocarbons from leaching.
Scale Inhibitor 500
Neutralized Phosphonate Blend
Scale Inhibitor 300
Amine methylene phosphonic acid designed for scale prevention and treatment of calcium, magnesium, barium, strontium or iron scales.
Scale Inhibitor200
Hydroxyamino phosphate ester with low molecular weight polyacrylates designed as a scale preventive product for squeeze or continuous treatment of calcium carbonate, calcium, barium, and strontium sulfate across a broad pH range.
Pop 200
Reduction of torque and drag, as well as better control of bit weight
Pop 100
Eliminates torque and drag, prevents differential sticking, protects from corrosion
PPD 126 WS
Lower molecular weight synergistic blend of poly esters and surfactants designed for lower temperature melting points and wax appearance temperatures.
PPD 125 WS
A medium molecular weight copolymer ester based pour point depressant. Designed for pour point ranges between 20 and 35°C
Polyalkylated Phenol
Pour point depressant and wax dispersant. Modified to have better cold temperature performance and effective on both microcrystalline was and intermediate wax appearance temperatures.
Very high molecular weight inhibitor for waxes with a melting point range above 60°C
PPD 112 CM
Polyalkylated phenol – pour point depressant and wax dispersant. Modified to have better cold temperature performance and effective on both microcrystalline was and intermediate wax appearance temperatures.
PPD 110 CM
High molecular weight crystal modifier and dispersant combination. Excellent for high melting point waxes and Wax appearance temperature between 30 – 50 °C
SD 110
A blend of solvents and surfactants designed to disperse hydrocarbon sludge containing a mix of waxes and asphaltenes
Paraffin Inhibitor
Oil soluble blend of wax crystal modifiers, dispersants and polar solvents designed for application in down hole remedial treatments.
PD 17 RTU
Paraffin Dispersant/Solvent; Great for well clean out’s; excellent broad spectrum wax dissolver; aids in the removal of waxy deposits; excellent well stimulation chemistry
PD 16
Exhibiting excellent paraffin and sludge penetration while neutralizing paraffin bonds to disperse sludge and prevent plugging of tubular goods and surface flow lines.
Mea Triazine
MEA-TRIAZINE is a water-soluble formulation of Triazine designed to remove hydrogen sulfide (H2S) from production systems.
DFA 100
Cement fluid loss additive
Primary Emulsifier
Primary emulsifier for formulating invert drilling fluids, provides fluid loss, used with AR-Combo Emulsifier
Combo Emulsifier
Primary and Secondary emulsifier, fluid loss in oil-based drilling fluids
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Bonding Catalyst
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
GS 22 Passivator
This solution will quickly remove Oxides/ Scales with minimal loss of base metal. This acid deoxidizer has exceptional detergency and corrosion inhibitor and passivation.
WT-4450
Broad spectrum biocide used to control sulfate reducing bacteria
Tetris 75
Antibacterial 75% concentration. Excellent to dissolve Iron Sulfide
Tetris 50
Antibacterial 50% concentration. Excellent to dissolve Iron Sulfide
Glut 25 & Glut 50
Glut Water Treatment Agent
Bio-Daz
Antibacterial that could kill for up to 2 -3 weeks. In some case bacteria is eliminated for up to 6 months.
X-400
4.0lb Xanthan gum slurry
DFA 100
Drilling Mud Additive in fresh water and brines, tolerant in high temperature, Xanthan replacement, viscosification
Sweep-A
Freshwater viscosifier for coiled tubing gel sweeps
Surfactant MW
Surfactant (Microemulsion)
NI-NE 100
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
COAG 100
Polyamines. High charge, relatively low molecular weights compared to dewatering polymers. They are replacements for Alum & FeCl3 in that they have high charge but much high molecular weights and work well as coagulants prior to solids dewatering.
PA 100C
Cationic polyacrylamide in water – in – oil emulsion / flocculant
FR 7290
Synthetic cationic organic polymer of highmolecular weight and high cationic charge supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package.
DFA 100
A high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of cationic charge. FL-120C FG is supplied in a free-flowing fine prill and microbead form that allows for rapid hydration & suspension in carrier fluids. The FL-120C FG Series provides exceptional performance in freshwater and low brine fluid conditions.
FL 100 C Pf
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of cationic charge. The product is supplied in a free-flowing fine prill and microbead form that allows for rapid hydration & suspension in carrier fluids. The FL-110C PF Series provides exceptional performance in freshwater and low brine fluid conditions. Chemistry variations available designed for multiple applications.
Bonding Catalyst
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
COAG 200
Poly DADMAC’s high charge, relatively low molecular weights compared to dewatering polymers. They are replacements for Alum & FeCl3 in that they have high charge but much high molecular weights and work well as coagulants prior to solids dewatering.
Oxygen Scavenger 200
Water soluble Ammonium Bisulfite Solution with Nickel Catalyst concentrate designed for use in oil field applications.
Oxygen Scavenger 100
Minimizes corrosion rates, 48 to 52% active catalyzed ammonium bisulfite solution that functions as a liquid oxygen scavenger for use in all types of water systems
Lube 150
Water-based drilling mud lubricant, tolerant in high temperature, viscosification
KCL-Sub
Liquid Potassium Chloride Substitute
Iron Control
Prevents Iron precipitation during flow back
GS-100 Guar Slurry
4.0lb Liquid Guar Slurry (40/45) and 4.0lb Liquid Guar Slurry (35/40)
FR-230AW
Winterized, fresh water to medium brine
FR-200
Anionic Friction Reducer (High brine/ Divalent)
FR 499 A
A medium molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a very high degree of anionic charge. FR-499 A is supplied in a free-flowing dry granular powder form. The FR-499 A Series provides exceptional performance in freshwater and low brine fluid conditions.
FR 340 VHA
High molecular weight, synthetic organic polyacrylamide based flocculant, which exhibits a high degree of anionic charge. FR-340 VHA is supplied in a free-flowing dry granular powder form.
FR 340 UHA
A ultra high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a high degree of anionic charge. FR-340 UHA is supplied in a free-flowing dry granular powder form. The FR-340 UHA Series provides exceptional performance in freshwater and low brine fluid conditions.
FR 340 A G
A high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a high degree of anionic charge. FR-340 A is supplied in a free-flowing dry granular powder form. The FR-340 A Series provides exceptional performance in freshwater and low brine
FR 330 UHA
Powder, anionic solids control product, suitable in WBM and OBM
FR 330 A
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a medium degree of anionic charge. FR-330 A is supplied in a free-flowing dry granular powder form. The FR-330 A Series provides exceptional performance in freshwater & low brine fluid conditions.
FR 315 A FG
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of anionic charge. FR 315 A FG is supplied in a free-flowing dry granular powder form. Fresh and high brine; dry anionic, fine grind
FR 310 LA
Powder, anionic solids control product, suitable in WBM
FR 300 LA FG
High molecular weight, granular, dry synthetic organic polyacrylamide based flocculent, which exhibits a very low degree of anionic charge. Fresh and high brine; dry anionic, fine grind
FR 252 AG
High purity hydrolyzed anionic emulsion AMPS co-polymer and Xanthan blend dispersed in a water and limited oil soluble carrier. AMPS-high brine, high temperature, high pressure; anionic. Chemistry variations available designed for multiple applications.
FR 250 A
Anionic FR, Sulfonated, medium to high brine
FR 248 A
Anionic Friction Reducer
FR 247A
Highly effective in multivalet and monovalet saturated complexes brines (example: 40-110,000 mg/l TDS). Fast activation ensures maximum pressure loss occurs within a 30 second timeframe.
FR 245A
Highly effective in multivalet and monovalet saturated complexes brines (example: 150-250,000 mg/l TDS). Fast activation ensures maximum pressure loss occurs within a 30 second timeframe.
FR 244A
Anionic Friction Reducer
FR 243A
Highly effective in very high calcium saturated brines (example: 24% – 32% CaCl2 brines). An excellent performer in API type brines; fast activation ensures maximum pressure loss occurs within a 30 second timeframe. Chemistry variations available designed for multiple applications.
FR 240A
Economical FR, fresh water to light brine
FR 235C
A synthetic organic polymer of high molecular weight and high cationic supplied as a rapidly hydrating emulsion. High brine; PHPA for coil tubing; cationic
FR 232A
Anionic Friction Reducer
FR 230C
Synthetic organic polymer of different molecular weight and medium/low cationic degree supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package; cationic
FR 230A
Fresh water to medium brine
FR 225CG
Synthetic organic polymer and Xanthan blend of high molecular weight and high cationic supplied as a rapidly hydrating emulsion. High brine; PHPA for coil tubing; cationic.
FR 220C
A synthetic organic polymer of different molecular weight and low cationic degree supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package; cationic
FR 220A
Anionic water-soluble polymer in emulsion; Exceptional performance in freshwater low brine and extremely high brine fluid conditions.
FR 211A
Anionic (<5% charge) polyacrylamide in water-in-oil emulsion. Stimulation/cement additive for drilling fluids; highly effective in fresh water/low brine applications.
FR 210N
Non-ionic FR
FR 150 A
Anionic FR, medium to high brine, builds viscosity. Viscosifier in brine systems for coiled tubing gel sweeps, HE-150 replacement
FR 140 C
Powder, cationic solids control product, durable performance, suitable in WBM.
FR 140 AP
Anionic Polyacrylamide in Water-in-Oil Emulsion/Flocculant
CL 100
Instant Borate Cross linker
Stream Clean 600
Full concentrate only; This product leaves tanks clean & smelling fresh with a fresh, citrus odor.
Stream Clean 500
Full Concentrate only; CONCENTRATED non hazardous environmentally safe solvent with emulsifying agent designed for dissolving Asphaltene and Paraffin deposits.
Stream Clean 400 DG
Suggested dilution: 5 to 1; A neutral liquid, solvent free, general purpose cleaner.
Stream Clean 300
Suggested dilution: 5 to 1; environmentally safe, tough-acting cleaning solvent, designed to take the place of highly volatile hydrocarbon solvents.
Stream Clean 200
Suggested dilution: 5 to 1; concentrated, highly alkaline emulsifier and cleaner, which is biodegradable, water soluble, non-flammable and non-toxic.
Stream Clean 111
Suggested dilution: 5 to 1; contains a unique deodorizing agent to control chemical odors during cleaning operations
Stream Clean 100
Suggested dilution: 5 to 1; industrial strength water soluble, nonflammable butyl solvent detergent degreaser
Clay Stabilizer
Lessens the swelling of the clay
PH Adjust 300
A high alkaline pH modifier agent for high alkaline fracturing fluid. It is used both in borate and zirconium cross-linked fluids where a pH of 10 or higher is needed for gel stability.
pH Adjust 300 contains potassium hydroxide and potassium carbonate in an aqueous solutions.
PH Adjust 100 SH
This is a high alkaline pH modifier and is primarily used to adjust the pH. Sodium Hydroxide based formula.
PH Adjust 100 PH
This is a high alkaline pH modifier and is primarily used to adjust the pH. Potassium Hydroxide based formula.
PC Non Caustic Buffer
Potassium Carbonate
Buffer 200
Low pH Buffer
Buffer 100
High pH Buffer
GB 400
Powdered Breaker (APS; Live/Non-Encapsulated)
GB 265
Liquid Enzyme Breaker
GB 100 E LT
Low Temp Encapsulated Breaker (APS)
GB 100 E HT
High temp encapsulated breaker (APS)
AD 100
Unique blend of surfactants and solvents designed to aid in the dispersion of asphaltenes and asphaltic materials into crude oil or aliphatic solvents. AD 100 acts to improve the stability of these mixtures and as well as reduce their pour points.
AD 200
Asphaltene Dispersant, heavy oil viscosity modifier aids in deposit removal
DF 200
General purpose defoamer for muds in freshwater or brine systems, oil and NPE-free
Activator
Highly effective intermediate for crude oil dehydration, water drop speed, desalting, and other applications for water-in-oil emulsion resolution.
DF 100
Water-based silicon defoamer, no mineral oil or FBS, performs well in a variety of applications
Q-60 Corrosion Inhibitor
Surfactant is a versatile and effective corrosion inhibitor for use in acid cleaning application.
PRP
PRP Powder encapsulates hydrocarbons, forming a physical matrix land and water, allowing remediation to take place.
Oil Buster
Oil Buster is a combination of PRP with different grades of ground corncob or other sorbent ingredients for use on hard surfaces.
Bio-Sok
Bio-Sok captures and biodegrades oil and fuel which leaks into a boat bilge, avoiding accidentally pumping of oil, fuel overboard and storm water.
Bio Boom
Vapor-X will encapsulate dangerous gases and suppress VOC’s thus reducing exposure. Vapor-X is an excellent hydrocarbon emulsifier it can be used effectively as a cleaner.
Vapor-x
Vapor-X will encapsulate dangerous gases and suppress VOC’s thus reducing exposure. Vapor-X is an excellent hydrocarbon emulsifier it can be used effectively as a cleaner.
WC 9840
Liquid nonionic, non-emulsifier surfactant developed for use in acidizing, cementing, and stimulation applications. The product effectively disperses and water wets oil coated, acid insoluble solids.
Well-Boom
Well Boom will facilitate testing in groundwater monitoring wells, absorbing contaminants in the well, and prevent hydrocarbons from leaching.
Scale Inhibitor 500
Neutralized Phosphonate Blend
Scale Inhibitor 300
Amine methylene phosphonic acid designed for scale prevention and treatment of calcium, magnesium, barium, strontium or iron scales.
Scale Inhibitor200
Hydroxyamino phosphate ester with low molecular weight polyacrylates designed as a scale preventive product for squeeze or continuous treatment of calcium carbonate, calcium, barium, and strontium sulfate across a broad pH range.
Pop 200
Reduction of torque and drag, as well as better control of bit weight
Pop 100
Eliminates torque and drag, prevents differential sticking, protects from corrosion
PPD 126 WS
Lower molecular weight synergistic blend of poly esters and surfactants designed for lower temperature melting points and wax appearance temperatures.
PPD 125 WS
A medium molecular weight copolymer ester based pour point depressant. Designed for pour point ranges between 20 and 35°C
Polyalkylated Phenol
Pour point depressant and wax dispersant. Modified to have better cold temperature performance and effective on both microcrystalline was and intermediate wax appearance temperatures.
Very high molecular weight inhibitor for waxes with a melting point range above 60°C
PPD 112 CM
Polyalkylated phenol – pour point depressant and wax dispersant. Modified to have better cold temperature performance and effective on both microcrystalline was and intermediate wax appearance temperatures.
PPD 110 CM
High molecular weight crystal modifier and dispersant combination. Excellent for high melting point waxes and Wax appearance temperature between 30 – 50 °C
SD 110
A blend of solvents and surfactants designed to disperse hydrocarbon sludge containing a mix of waxes and asphaltenes
Paraffin Inhibitor
Oil soluble blend of wax crystal modifiers, dispersants and polar solvents designed for application in down hole remedial treatments.
PD 17 RTU
Paraffin Dispersant/Solvent; Great for well clean out’s; excellent broad spectrum wax dissolver; aids in the removal of waxy deposits; excellent well stimulation chemistry
PD 16
Exhibiting excellent paraffin and sludge penetration while neutralizing paraffin bonds to disperse sludge and prevent plugging of tubular goods and surface flow lines.
Mea Triazine
MEA-TRIAZINE is a water-soluble formulation of Triazine designed to remove hydrogen sulfide (H2S) from production systems.
DFA 100
Cement fluid loss additive
Primary Emulsifier
Primary emulsifier for formulating invert drilling fluids, provides fluid loss, used with AR-Combo Emulsifier
Combo Emulsifier
Primary and Secondary emulsifier, fluid loss in oil-based drilling fluids
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Scale Away
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
Bonding Catalyst
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
GS 22 Passivator
This solution will quickly remove Oxides/ Scales with minimal loss of base metal. This acid deoxidizer has exceptional detergency and corrosion inhibitor and passivation.
WT-4450
Broad spectrum biocide used to control sulfate reducing bacteria
Tetris 75
Antibacterial 75% concentration. Excellent to dissolve Iron Sulfide
Tetris 50
Antibacterial 50% concentration. Excellent to dissolve Iron Sulfide
Glut 25 & Glut 50
Glut Water Treatment Agent
Bio-Daz
Antibacterial that could kill for up to 2 -3 weeks. In some case bacteria is eliminated for up to 6 months.
X-400
4.0lb Xanthan gum slurry
DFA 100
Drilling Mud Additive in fresh water and brines, tolerant in high temperature, Xanthan replacement, viscosification
Sweep-A
Freshwater viscosifier for coiled tubing gel sweeps
Surfactant MW
Surfactant (Microemulsion)
NI-NE 100
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
COAG 100
Polyamines. High charge, relatively low molecular weights compared to dewatering polymers. They are replacements for Alum & FeCl3 in that they have high charge but much high molecular weights and work well as coagulants prior to solids dewatering.
PA 100C
Cationic polyacrylamide in water – in – oil emulsion / flocculant
FR 7290
Synthetic cationic organic polymer of highmolecular weight and high cationic charge supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package.
DFA 100
A high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of cationic charge. FL-120C FG is supplied in a free-flowing fine prill and microbead form that allows for rapid hydration & suspension in carrier fluids. The FL-120C FG Series provides exceptional performance in freshwater and low brine fluid conditions.
FL 100 C Pf
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of cationic charge. The product is supplied in a free-flowing fine prill and microbead form that allows for rapid hydration & suspension in carrier fluids. The FL-110C PF Series provides exceptional performance in freshwater and low brine fluid conditions. Chemistry variations available designed for multiple applications.
Bonding Catalyst
Biodegradable buffered acid that is mild, non-corrosive, and dissolves hard water deposits on concrete, rust, or corrosion. The product is hydrochloric acid based.
COAG 200
Poly DADMAC’s high charge, relatively low molecular weights compared to dewatering polymers. They are replacements for Alum & FeCl3 in that they have high charge but much high molecular weights and work well as coagulants prior to solids dewatering.
Oxygen Scavenger 200
Water soluble Ammonium Bisulfite Solution with Nickel Catalyst concentrate designed for use in oil field applications.
Oxygen Scavenger 100
Minimizes corrosion rates, 48 to 52% active catalyzed ammonium bisulfite solution that functions as a liquid oxygen scavenger for use in all types of water systems
Lube 150
Water-based drilling mud lubricant, tolerant in high temperature, viscosification
KCL-Sub
Liquid Potassium Chloride Substitute
Iron Control
Prevents Iron precipitation during flow back
GS-100 Guar Slurry
4.0lb Liquid Guar Slurry (40/45) and 4.0lb Liquid Guar Slurry (35/40)
FR-230AW
Winterized, fresh water to medium brine
FR-200
Anionic Friction Reducer (High brine/ Divalent)
FR 499 A
A medium molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a very high degree of anionic charge. FR-499 A is supplied in a free-flowing dry granular powder form. The FR-499 A Series provides exceptional performance in freshwater and low brine fluid conditions.
FR 340 VHA
High molecular weight, synthetic organic polyacrylamide based flocculant, which exhibits a high degree of anionic charge. FR-340 VHA is supplied in a free-flowing dry granular powder form.
FR 340 UHA
A ultra high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a high degree of anionic charge. FR-340 UHA is supplied in a free-flowing dry granular powder form. The FR-340 UHA Series provides exceptional performance in freshwater and low brine fluid conditions.
FR 340 A G
A high molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a high degree of anionic charge. FR-340 A is supplied in a free-flowing dry granular powder form. The FR-340 A Series provides exceptional performance in freshwater and low brine
FR 330 UHA
Powder, anionic solids control product, suitable in WBM and OBM
FR 330 A
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a medium degree of anionic charge. FR-330 A is supplied in a free-flowing dry granular powder form. The FR-330 A Series provides exceptional performance in freshwater & low brine fluid conditions.
FR 315 A FG
High molecular weight, synthetic organic polyacrylamide based flocculent, which exhibits a low degree of anionic charge. FR 315 A FG is supplied in a free-flowing dry granular powder form. Fresh and high brine; dry anionic, fine grind
FR 310 LA
Powder, anionic solids control product, suitable in WBM
FR 300 LA FG
High molecular weight, granular, dry synthetic organic polyacrylamide based flocculent, which exhibits a very low degree of anionic charge. Fresh and high brine; dry anionic, fine grind
FR 252 AG
High purity hydrolyzed anionic emulsion AMPS co-polymer and Xanthan blend dispersed in a water and limited oil soluble carrier. AMPS-high brine, high temperature, high pressure; anionic. Chemistry variations available designed for multiple applications.
FR 250 A
Anionic FR, Sulfonated, medium to high brine
FR 248 A
Anionic Friction Reducer
FR 247A
Highly effective in multivalet and monovalet saturated complexes brines (example: 40-110,000 mg/l TDS). Fast activation ensures maximum pressure loss occurs within a 30 second timeframe.
FR 245A
Highly effective in multivalet and monovalet saturated complexes brines (example: 150-250,000 mg/l TDS). Fast activation ensures maximum pressure loss occurs within a 30 second timeframe.
FR 244A
Anionic Friction Reducer
FR 243A
Highly effective in very high calcium saturated brines (example: 24% – 32% CaCl2 brines). An excellent performer in API type brines; fast activation ensures maximum pressure loss occurs within a 30 second timeframe. Chemistry variations available designed for multiple applications.
FR 240A
Economical FR, fresh water to light brine
FR 235C
A synthetic organic polymer of high molecular weight and high cationic supplied as a rapidly hydrating emulsion. High brine; PHPA for coil tubing; cationic
FR 232A
Anionic Friction Reducer
FR 230C
Synthetic organic polymer of different molecular weight and medium/low cationic degree supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package; cationic
FR 230A
Fresh water to medium brine
FR 225CG
Synthetic organic polymer and Xanthan blend of high molecular weight and high cationic supplied as a rapidly hydrating emulsion. High brine; PHPA for coil tubing; cationic.
FR 220C
A synthetic organic polymer of different molecular weight and low cationic degree supplied as rapidly hydrating emulsion. High brine and freshwater; high activator package; cationic
FR 220A
Anionic water-soluble polymer in emulsion; Exceptional performance in freshwater low brine and extremely high brine fluid conditions.
FR 211A
Anionic (<5% charge) polyacrylamide in water-in-oil emulsion. Stimulation/cement additive for drilling fluids; highly effective in fresh water/low brine applications.
FR 210N
Non-ionic FR
FR 150 A
Anionic FR, medium to high brine, builds viscosity. Viscosifier in brine systems for coiled tubing gel sweeps, HE-150 replacement
FR 140 C
Powder, cationic solids control product, durable performance, suitable in WBM.
FR 140 AP
Anionic Polyacrylamide in Water-in-Oil Emulsion/Flocculant
CL 100
Instant Borate Cross linker
Stream Clean 600
Full concentrate only; This product leaves tanks clean & smelling fresh with a fresh, citrus odor.
Stream Clean 500
Full Concentrate only; CONCENTRATED non hazardous environmentally safe solvent with emulsifying agent designed for dissolving Asphaltene and Paraffin deposits.
Stream Clean 400 DG
Suggested dilution: 5 to 1; A neutral liquid, solvent free, general purpose cleaner.
Stream Clean 300
Suggested dilution: 5 to 1; environmentally safe, tough-acting cleaning solvent, designed to take the place of highly volatile hydrocarbon solvents.
Stream Clean 200
Suggested dilution: 5 to 1; concentrated, highly alkaline emulsifier and cleaner, which is biodegradable, water soluble, non-flammable and non-toxic.
Stream Clean 111
Suggested dilution: 5 to 1; contains a unique deodorizing agent to control chemical odors during cleaning operations
Stream Clean 100
Suggested dilution: 5 to 1; industrial strength water soluble, nonflammable butyl solvent detergent degreaser
Clay Stabilizer
Lessens the swelling of the clay
PH Adjust 300
A high alkaline pH modifier agent for high alkaline fracturing fluid. It is used both in borate and zirconium cross-linked fluids where a pH of 10 or higher is needed for gel stability.
pH Adjust 300 contains potassium hydroxide and potassium carbonate in an aqueous solutions.
PH Adjust 100 SH
This is a high alkaline pH modifier and is primarily used to adjust the pH. Sodium Hydroxide based formula.
PH Adjust 100 PH
This is a high alkaline pH modifier and is primarily used to adjust the pH. Potassium Hydroxide based formula.
PC Non Caustic Buffer
Potassium Carbonate
Buffer 200
Low pH Buffer
Buffer 100
High pH Buffer
GB 400
Powdered Breaker (APS; Live/Non-Encapsulated)
GB 265
Liquid Enzyme Breaker
GB 100 E LT
Low Temp Encapsulated Breaker (APS)
GB 100 E HT
High temp encapsulated breaker (APS)
AD 100
Unique blend of surfactants and solvents designed to aid in the dispersion of asphaltenes and asphaltic materials into crude oil or aliphatic solvents. AD 100 acts to improve the stability of these mixtures and as well as reduce their pour points.
AD 200
Asphaltene Dispersant, heavy oil viscosity modifier aids in deposit removal
DF 200
General purpose defoamer for muds in freshwater or brine systems, oil and NPE-free
Activator
Highly effective intermediate for crude oil dehydration, water drop speed, desalting, and other applications for water-in-oil emulsion resolution.
DF 100
Water-based silicon defoamer, no mineral oil or FBS, performs well in a variety of applications
Q-60 Corrosion Inhibitor
Surfactant is a versatile and effective corrosion inhibitor for use in acid cleaning application.
